Magentis and Optima repair since 2000 of release
1. Engines
1.1. Engines of 2,0 l of DOHC
1.1.1. Specifications
1.1.2. Compression check
1.1.3. Gear belt
1.1.4. Check and adjustment of a tension of poliklinovy belts
1.1.5. Adjustment of a tension of a belt of a drive of the generator
1.1.6. Adjustment of a tension of a belt of a drive of the amplifier of a wheel and conditioner
1.1.7. Check of hydraulic jacks of gaps of valves
1.1.8. Head of the block of cylinders and valve
1.1.9. Engine support
1.1.10. Removal and engine and transmission installation
1.1.11. Camshafts and yokes
1.1.12. Forward cover, oil pump and balancing shaft
1.1.13. Piston and rod
1.1.14. Cranked shaft and flywheel
1.1.15. Block of cylinders
1.1.16. The air filter (except V6)
1.1.17. Inlet collector
1.1.18. Final collector
1.1.19. Exhaust silencers
1.1.20. Search and elimination of malfunctions
1.2. Engines of V6 2,5 l
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










1-1-10-snyatie-i-ustanovka-dvigatelya-i-korobki-peredach.html

1.1.10. Removal and engine and transmission installation

 PERFORMANCE ORDER

1. Remove the storage battery.
2. Remove the air filter.
3. Disconnect electric sockets from the switch of light of a backing and plaits of wires of the engine.
4. On the car with a mechanical five-speed transmission disconnect the electric socket from the regulating valve of a choice.

5. Disconnect electric sockets from the generator and the sensor of pressure of oil.

6. Merge cooling liquid.
7. On the car with an automatic transmission disconnect hoses of an oil radiator of a transmission.

Mark hoses before their detachment not to mix them at repeated accession.


Be careful, that transmission liquid from hoses did not flow out. For an exception of hit of dirt close the ends of hoses jams.

8. Disconnect the top and bottom hoses from a radiator and remove a radiator.

9. Disconnect from the engine a wire of connection with "weight".
10. Disconnect a vacuum hose of the vacuum amplifier of brakes.

11. Disconnect from the engine hoses of giving and fuel return.

Gasoline is extremely inflammable, at work with elements of fuel system using fire, the sparking devices opened by fire-dangerous light devices and smoking is forbidden. It is necessary to avoid iskreniye emergence at the address with wires and elekyotrichesky devices.

12. Disconnect hoses of system the coolings going to a heater.
13. Disconnect from the engine an accelerator cable.
14. On the car with a mechanical five-speed transmission disconnect a coupling cable from a transmission case.
15. On the car with an automatic transmission disconnect a cable of management of a transmission.
16. On the car with a mechanical five-speed transmission disconnect drafts of a choice and gear shifting.

17. Disconnect from a transmission the socket of the sensor of speed of the car.

18. Separate a steering shaft from steering transfer.

19. Remove an engine support.

20. Remove a transmission support.

21. After removal of a wheel, the sensor of frequency of rotation of a wheel and a support, disconnect the lower part of a rotary fist from a rack, then separate the spherical hinge of a tip of steering draft from a rotary fist.

22. Lift the car.

23. Merge oil from a transmission.

24. Disconnect a forward exhaust pipe from a final collector.

Soft wire fix an exhaust pipe on the car bottom.

25. Establish the lift under the bottom frame.

Check that all electric sockets, hoses, tubes and plaits of wires are disconnected from the engine.

26. Removal of the bottom frame is carried out with the engine, a transmission, steering transfer and power shafts. Turn out 6 bolts of fastening of the bottom frame and slowly lift the car.

27. Remove steering transfer and suspend the engine and a transmission on the lift, then separate the engine and a transmission from the bottom frame. Separating the engine and a transmission from the bottom frame remove an arm of a support of the engine and a transmission arm, then lift the lift.

Installation

 PERFORMANCE ORDER

1. At engine installation with a transmission in the car be convinced that did not damage or did not jam hoses, plaits of wires, tubes and electric sockets.

2. Establish the engine and a transmission on the bottom frame and fix a lobby and a back support between the bottom frame, the engine and a transmission.

Be especially careful at installation of a forward support of the engine that it was not damaged from strong vibrations at operation of the engine.

3. Establish the engine, a transmission and the bottom frame in sequence, return to removal.

4. Fill in cooling liquid in system of cooling and check its tightness.
5. Fill in oil in a transmission and check its tightness.
6. Check work of drafts of gear shifting and an accelerator cable.
7. Check operation of all sensors.


«on a step back
1.1.9. Engine support
on the following page»
1.1.11. Camshafts and yokes