Magentis and Optima repair since 2000 of release
1. Engines
1.1. Engines of 2,0 l of DOHC
1.1.1. Specifications
1.1.2. Compression check
1.1.3. Gear belt
1.1.4. Check and adjustment of a tension of poliklinovy belts
1.1.5. Adjustment of a tension of a belt of a drive of the generator
1.1.6. Adjustment of a tension of a belt of a drive of the amplifier of a wheel and conditioner
1.1.7. Check of hydraulic jacks of gaps of valves
1.1.8. Head of the block of cylinders and valve
1.1.9. Engine support
1.1.10. Removal and engine and transmission installation
1.1.11. Camshafts and yokes
1.1.12. Forward cover, oil pump and balancing shaft
1.1.13. Piston and rod
1.1.14. Cranked shaft and flywheel
1.1.15. Block of cylinders
1.1.16. The air filter (except V6)
1.1.17. Inlet collector
1.1.18. Final collector
1.1.19. Exhaust silencers
1.1.20. Search and elimination of malfunctions
1.2. Engines of V6 2,5 l
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 








18+

1-1-19-glushiteli.html

1.1.19. Exhaust silencers

Removal

Main exhaust silencer

 PERFORMANCE ORDER

Before removal or survey of elements of system of production of the fulfilled gases be convinced that it cooled down enough.

1. Disconnect the main exhaust silencer from the central exhaust pipe.

2. Remove rubber suspension brackets and the main exhaust silencer from the car.

Central exhaust pipe

 PERFORMANCE ORDER

1. Separate the central exhaust silencer from the main exhaust silencer.

2. After a detachment from a forward exhaust pipe remove the central exhaust silencer from the car.

Forward exhaust pipe (including catalytic converter)

 PERFORMANCE ORDER

1. Separate a forward exhaust pipe from the central exhaust silencer.

2. Turn out a forward bolt and nuts of fastening of an exhaust pipe to a final collector.

3. Remove a forward exhaust pipe from rubber suspension brackets.

Check

 PERFORMANCE ORDER

1. Check exhaust silencers and pipes on absence of corrosion and damages.
2. Check rubber suspension brackets on absence of aging and cracks.

Installation

 PERFORMANCE ORDER

1. Temporarily establish a forward exhaust pipe (catalytic converter), the central and back exhaust silencers.
2. Establish rubber suspension brackets so that they were identical on length.
3. Reliably tighten all connections of elements of system of production of the fulfilled gases. Moving to the parties an exhaust system of the car, check, that it did not concern a car body. Otherwise replace rubber suspension brackets of an exhaust system.


«on a step back
1.1.18. Final collector
on the following page»
1.1.20. Search and elimination of malfunctions