Magentis and Optima repair since 2000 of release
1. Engines
1.1. Engines of 2,0 l of DOHC
1.1.1. Specifications
1.1.2. Compression check
1.1.3. Gear belt
1.1.4. Check and adjustment of a tension of poliklinovy belts
1.1.5. Adjustment of a tension of a belt of a drive of the generator
1.1.6. Adjustment of a tension of a belt of a drive of the amplifier of a wheel and conditioner
1.1.7. Check of hydraulic jacks of gaps of valves
1.1.8. Head of the block of cylinders and valve
1.1.9. Engine support
1.1.10. Removal and engine and transmission installation
1.1.11. Camshafts and yokes
1.1.12. Forward cover, oil pump and balancing shaft
1.1.13. Piston and rod
1.1.14. Cranked shaft and flywheel
1.1.15. Block of cylinders
1.1.16. The air filter (except V6)
1.1.17. Inlet collector
1.1.18. Final collector
1.1.19. Exhaust silencers
1.1.20. Search and elimination of malfunctions
1.2. Engines of V6 2,5 l
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










1-1-5-regulirovka-natyazheniya-remnya-privoda-generatora.html

1.1.5. Adjustment of a tension of a belt of a drive of the generator

 PERFORMANCE ORDER

If the belt is poorly tense, at work it will publish extraneous noise, and will be subject to premature wear. If the belt is tense very strongly, damage of bearings of the water pump or the generator is possible.

1. Weaken nuts of "A" of fastening of the generator and a bolt of "B" of fixing of a bolt of adjustment of a tension.

2. Rotating an adjusting bolt, adjust a belt tension.
3. Tighten a bolt of "B" of fixing of a bolt of adjustment of a tension.
4. Tighten nuts of "A" of fastening of the generator.
5. Check a tension of a belt and, if necessary, repeat adjustment.

Inhaling moment

  • Nuts of "A" of fastening of the generator: 3454 N m
  • Bolt of "B" of fixing of a bolt of adjustment of a tension: 2025 N m
  • Adjusting bolt: 812 N m

on a step back
1.1.4. Check and adjustment of a tension of poliklinovy belts
on the following page
1.1.6. Adjustment of a tension of a belt of a drive of the amplifier of a wheel and conditioner