Magentis and Optima repair since 2000 of release
	1. Engines
		1.1. Engines of 2,0 l of DOHC
			1.1.1. Specifications
			1.1.2. Compression check
			1.1.3. Gear belt
			1.1.4. Check and adjustment of a tension of poliklinovy belts
			1.1.5. Adjustment of a tension of a belt of a drive of the generator
			1.1.6. Adjustment of a tension of a belt of a drive of the amplifier of a wheel and conditioner
			1.1.7. Check of hydraulic jacks of gaps of valves
			1.1.8. Head of the block of cylinders and valve
			1.1.9. Engine support
			1.1.10. Removal and engine and transmission installation
			1.1.11. Camshafts and yokes
			1.1.12. Forward cover, oil pump and balancing shaft
			1.1.13. Piston and rod
			1.1.14. Cranked shaft and flywheel
			1.1.15. Block of cylinders
			1.1.16. The air filter (except V6)
			1.1.17. Inlet collector
			1.1.18. Final collector
			1.1.19. Exhaust silencers
			1.1.20. Search and elimination of malfunctions
		1.2. Engines of V6 2,5 l
	2. Greasing system
	3. Cooling system
	4. Control and decrease in toxicity
	5. Fuel system
	6. Ignition system
	7. Coupling
	8. Transmission
	9. Power shafts, axes
	10. Suspension bracket
	11. Steering
	12. Brake system
	13. Body
	14. Central air
	15. Electric equipment
	16. Electric circuits

1-1-6-regulirovka-natyazheniya-remnya-privoda-usilitelya-rulya-i-kondicionera.html

1.1.6. Adjustment of a tension of a belt of a drive of the amplifier of a wheel and conditioner

PERFORMANCE ORDER

1. Weaken a bolt "And" fixings of a bolt of adjustment of a tension.

2. Rotating an adjusting bolt "In", adjust a belt tension.

3. Tighten a bolt "And" fixings of a bolt of adjustment of a tension.
4. Check a tension of a belt and, if necessary, repeat adjustment.

Before repeated check turn a cranked shaft of the engine on some turns.