Magentis and Optima repair since 2000 of release
1. Engines
1.1. Engines of 2,0 l of DOHC
1.2. Engines of V6 2,5 l
1.2.1. Specifications
1.2.2. Compression check
1.2.3. Adjustment of gaps of valves
1.2.4. Gear belt
1.2.5. Check and adjustment of a tension of poliklinovy belts
1.2.6. Tightening of bolts of fastening of a head of the block of cylinders
1.2.7. Head of the block of cylinders, valve and spring of valves
1.2.8. Engine support
1.2.9. Removal and engine and transmission installation
1.2.10. Camshafts
1.2.11. Hydraulic jacks of gaps of valves
1.2.12. Pistons and rods
1.2.13. Cranked shaft
1.2.14. Block of cylinders
1.2.15. Air filter of the V6 engine
1.2.16. Broad air chamber
1.2.17. Inlet collector
1.2.18. Final collector
1.2.19. Exhaust silencers
1.2.20. Search and elimination of malfunctions
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










1-2-17-vpusknojj-kollektor.html

1.2.17. Inlet collector

Removal

 PERFORMANCE ORDER

1. Remove the broad air chamber.
2. Remove pressure in fuel system and disconnect a fuel hose of a high pressure.
3. Disconnect a hose of return of fuel.

4. Remove the highway with fuel nozzles.

Be careful not to drop fuel nozzles at removal of the fuel highway.


Be careful, as at removal of fuel nozzles fuel can follow.

Check

 PERFORMANCE ORDER

1. Check an inlet collector on absence of damages, cracks or narrowing of the vacuum final channel, an exit of water or gases.

2. By a metal ruler and shchupy measure planeness of a privalochny surface of an inlet collector.

  • Deviation from planeness of a privalochny surface of an inlet collector: 0,15 mm
  • Maximum permissible deviation from planeness of a privalochny surface of an inlet collector: 0,20 mm

Installation

 PERFORMANCE ORDER

1. Establish laying of an inlet collector by the party with glue to an inlet collector.

2. Establish a new insulator to an inlet collector.


«on a step back
1.2.16. Broad air chamber
on the following page»
1.2.18. Final collector