Magentis and Optima repair since 2000 of release
1. Engines
1.1. Engines of 2,0 l of DOHC
1.2. Engines of V6 2,5 l
1.2.1. Specifications
1.2.2. Compression check
1.2.3. Adjustment of gaps of valves
1.2.4. Gear belt
1.2.5. Check and adjustment of a tension of poliklinovy belts
1.2.6. Tightening of bolts of fastening of a head of the block of cylinders
1.2.7. Head of the block of cylinders, valve and spring of valves
1.2.8. Engine support
1.2.9. Removal and engine and transmission installation
1.2.10. Camshafts
1.2.11. Hydraulic jacks of gaps of valves
1.2.12. Pistons and rods
1.2.13. Cranked shaft
1.2.14. Block of cylinders
1.2.15. Air filter of the V6 engine
1.2.16. Broad air chamber
1.2.17. Inlet collector
1.2.18. Final collector
1.2.19. Exhaust silencers
1.2.20. Search and elimination of malfunctions
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










1-2-18-vypusknojj-kollektor.html

1.2.18. Final collector

Check

 PERFORMANCE ORDER

1. Check a final collector on absence of damages and splitting.

2. By a metal ruler and shchupy measure planeness of a privalochny surface of a final collector.

  • Deviation from planeness of a privalochny surface of a final collector: 0,15 mm
  • Maximum permissible deviation from planeness of a privalochny surface of a final collector: 0,30 mm

3. Check laying of a final collector on absence of stratifying and damages.


«on a step back
1.2.17. Inlet collector
on the following page»
1.2.19. Exhaust silencers