10-1-tekhnicheskie-dannye.html
10.1. Specifications
Forward suspension bracket
|
Type |
C two cross-section levers and stabilizer of cross-section stability |
Usual suspension bracket
|
– color of a spring |
The white-green |
– length of a spring, mm |
383,4 |
High suspension bracket |
– color of a spring |
The red-white |
– length of a spring, mm |
389,6 |
Shock-absorber of a forward suspension bracket
|
Type |
The gas |
Course, mm |
125,5 |
Damping at acceleration of 0,3 m/s
|
– expansion, N |
1138±167 |
– compression, N |
588±176 |
Back suspension bracket
|
|
Type |
The iterative |
Usual suspension bracket |
– color of a spring |
The green – red |
– length of a spring, mm |
354 |
High suspension bracket |
– color of a spring |
The green – yellow |
– length of a spring, mm |
363,4 |
Shock-absorber of a back suspension bracket
|
Type |
The gas |
Course, mm |
177,5 |
Damping at acceleration of 0,3 m/s |
– expansion, N |
630±98 |
– compression, N |
294±69 |
Corners of installation of wheels
Name |
Forward wheels
|
Back wheels
|
Convergence, mm |
0±3
|
3±2
|
Disorder
|
– usual suspension bracket |
|
|
– high suspension bracket |
8 '±30'
|
– 38 '±30'
|
Corner of a longitudinal inclination шкворня |
3 ° 15' ±0 °
|
|
Tilt angle rotary шкворня |
8°29'
|
|
Wheels and tires
Wheel with a steel disk |
– diameter of a wheel |
5,5 J x 14 |
– size of the tire |
195/70 R14 |
– pressure, kPa |
207 |
– radial palpation of a wheel |
0,6 |
– axial palpation of a wheel |
1,0 |
Wheel with an aluminum disk |
– diameter of a wheel |
6 J x 15 |
– size of the tire |
205/60 R15 |
– pressure, kPa |
207 |
– radial palpation of a wheel |
0,3 |
– axial palpation of a wheel |
0,3 |
Lubricants
|
Spherical hinge of the top forward lever |
Sunlight MV-2 lubricant |
Draft of the stabilizer |
Sunlight MV-2 lubricant |
Ball bearing of the back top lever |
Polylub 801K |
Moments of an inhaling, N • m
Nuts of fastening of a wheel |
90–110 |
Nuts of fastening of the spherical hinge of the top lever |
35–45 |
Nuts of fastening of the top lever |
55–65 |
Nut of fastening of the spherical hinge of the top lever |
80–100 |
Nut of fastening of the spherical hinge of the bottom lever |
75–90 |
The spherical hinge of the bottom lever to a rotary fist |
100–120 |
Nut of fastening of the bottom lever |
100–120 |
Bolt of fastening of the bottom lever (And) to the bottom frame |
100–120 |
Bolt of fastening of the bottom lever (In) to the bottom frame |
120–140 |
Nut of fastening of a fork to the bottom lever |
100–120 |
Nut of fastening of a fork to an assembly bolt |
60–80 |
Top assembly nut |
40–50 |
Самоконтрящиеся nuts of fastening are resistant |
20–25 |
Самоконтрящиеся nuts of draft of the stabilizer |
35–45 |
Bolt of fastening of an arm of the stabilizer of cross-section stability to the bottom frame |
30–45 |
Bolt of fastening of an arm of the stabilizer of cross-section stability to a bolt |
30–45 |
Top nut of fastening of the shock-absorber |
40–50 |
Bottom bolt of fastening of the shock-absorber |
80–90 |
Самоконтрящиеся nuts of fastening of the shock-absorber |
20–25 |
Nut of fastening of the top back lever to a nave support |
100–120 |
Bolt of fastening of the top back lever to a body |
40–50 |
Nut of fastening of the top back lever to an arm |
50–60 |
Nut of fastening of the central lever |
60–72 |
Nut of fastening of the central lever to a cross-section beam |
100–120 |
Nut of fastening of the longitudinal lever to a body |
140–160 |
Nut of fastening of the longitudinal lever to a nave support |
100–120 |
Bolt of fastening of a cross-section beam to a body |
100–120 |
Nut of fastening of a tip of steering draft |
50–55 |
|
|