Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
10.1. Specifications
10.2. Rack of a forward suspension bracket
10.3. Bottom lever of a forward suspension bracket
10.4. Top lever of a forward suspension bracket
10.5. Shock-absorber of a back suspension bracket
10.6. Replacement of the top lever of a back suspension bracket
10.7. Replacement of the longitudinal lever of a back suspension bracket
10.8. Replacement of the supporting lever of a back suspension bracket
10.9. Replacement of the central lever of a back suspension bracket
10.10. Replacement of draft of the back stabilizer of cross-section stability
10.11. Corners of installation of forward wheels
10.12. Adjustment of a convergence of back wheels
10.13. Disorder of back wheels
10.14. Wear of tires
10.15. Wheel palpation
10.16. Search and elimination of malfunctions
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










10-10-zamena-tyagi-zadnego-stabilizatora-poperechnojj-ustojjchivosti.html

10.10. Replacement of draft of the back stabilizer of cross-section stability

 PERFORMANCE ORDER

1. Remove the back stabilizer of cross-section stability.

2. Check a torque which is necessary for putting for a provorachivaniye of a pin of the spherical hinge of draft of the stabilizer.

  1. If there are cracks in a protective cover, replace it and add greasing in the hinge.
  2. Several times shake here and there a pin of the spherical hinge of draft of the stabilizer.
  3. Screw самоконтрящуюся a nut on a pin of the spherical hinge and then measure a torque necessary for a provorachivaniye of a pin of the spherical hinge.
    Inhaling moment: 1,7–3,2 N • m
  4. If the torque exceeds admissible values, replace draft of the stabilizer.
  5. If the torque is much lower than admissible value, the spherical hinge can be reused, if it is not got jammed and has no excessive люфта.

«on a step back
10.9. Replacement of the central lever of a back suspension bracket
on the following page»
10.11. Corners of installation of forward wheels