Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
11.1. Specifications
11.2. Check of a free wheeling of a steering wheel
11.3. Check of an angle of rotation of forward wheels
11.4. Check of return of a steering wheel in a starting position
11.5. Check of a torque of a pin of the spherical hinge of a tip of steering draft
11.6. Check of level of liquid
11.7. Liquid replacement in a hydraulic drive of the power steering
11.8. Pumping of hydraulic system of the amplifier of a steering
11.9. Check of a tension of a belt of a drive of the pump of the power steering
11.10. Check of pressure of liquid in hydraulic system
11.11. Steering column / helmsman shaft
11.12. Steering transfer of cars with the power steering
11.13. Power steering pump
11.14. Power steering hoses
11.15. Electronic system of the amplifier of a wheel
11.16. Search and elimination of malfunctions of a steering
11.17. Search and elimination of malfunctions of a steering of EPS
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










11-10-proverka-davleniya-zhidkosti-v-gidravlicheskojj-sisteme.html

11.10. Check of pressure of liquid in hydraulic system

 PERFORMANCE ORDER

1. Disconnect a pressure head hose from the pump of the amplifier of a steering. Between the disconnected pressure head hose and the pump connect the special measuring tool, as is shown in drawing.

2. Pump over a hydraulic drive of the amplifier of a steering, then start up the engine and turn a steering wheel several times so that the temperature of liquid raised to 50°C.
3. Increase frequency of rotation of a cranked shaft of the engine to 1000мин-1.
4. Close the valve of the switch of the special tool and measure pressure.

The pressure of liquid created by the pump of the amplifier of a steering: 1138 psi

Do not hold the valve of the switch of the special tool of the closed more than 10 pages.

5. Remove special tools and connect a pressure head hose to the pump, having tightened a connecting nut of a hose the demanded moment.

Inhaling moment: 55–65 N • m

6. Remove air from a hydraulic drive of the amplifier of a steering.


«on a step back
11.9. Check of a tension of a belt of a drive of the pump of the power steering
on the following page»
11.11. Steering column / helmsman shaft