Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
11.1. Specifications
11.2. Check of a free wheeling of a steering wheel
11.3. Check of an angle of rotation of forward wheels
11.4. Check of return of a steering wheel in a starting position
11.5. Check of a torque of a pin of the spherical hinge of a tip of steering draft
11.6. Check of level of liquid
11.7. Liquid replacement in a hydraulic drive of the power steering
11.8. Pumping of hydraulic system of the amplifier of a steering
11.9. Check of a tension of a belt of a drive of the pump of the power steering
11.10. Check of pressure of liquid in hydraulic system
11.11. Steering column / helmsman shaft
11.12. Steering transfer of cars with the power steering
11.13. Power steering pump
11.14. Power steering hoses
11.15. Electronic system of the amplifier of a wheel
11.16. Search and elimination of malfunctions of a steering
11.17. Search and elimination of malfunctions of a steering of EPS
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










11-4-proverka-vozvrata-rulevogo-kolesa-v-iskhodnoe-polozhenie.html

11.4. Check of return of a steering wheel in a starting position

 PERFORMANCE ORDER

1. Check that the steering wheel comes back to a starting position. Force which is necessary for putting for turn of a steering wheel and return of a wheel to a starting position, should be same, as well as for passing of moderate turns and turns.

2. When the steering wheel is turned on 90 ° and detained in this situation within several seconds while the car moves with speed of 20-30 km/h, after an otpuskaniye the steering wheel should come back within 70 ° from neutral situation.

If the steering wheel turns very quickly, during the first moment the effort necessary for turn, can be increased. This normal phenomenon, especially on at operation of the engine idling as productivity of the pump is a little reduced.


«on a step back
11.3. Check of an angle of rotation of forward wheels
on the following page»
11.5. Check of a torque of a pin of the spherical hinge of a tip of steering draft