12-1-tekhnicheskie-dannye.html
12.1. Specifications
Main brake cylinder |
– type |
Tandemny |
– diameter of the cylinder, mm
|
CBS |
23,8 |
ABS |
25,4 |
Vacuum amplifier of brakes
|
– type |
The vacuum |
– effective diameter, mm |
CBS |
177,8 |
ABS |
203,2 |
– ratio |
CBS |
7,0: 1 |
ABS |
7,5: 1 |
Pressure limiter
|
– pressure of inclusion, MPa |
3,43 |
– decompression relation |
0,32: 1 |
Forward brakes
|
– type |
Disk, ventilated |
– diameter of a brake disk, mm |
257 |
– thickness of a brake disk, mm |
24,5 |
– thickness of brake shoes, mm |
11 |
– diameter of the cylinder, mm |
57,2 |
Back drum-type brakes
|
– internal diameter of a brake drum, mm |
228,6 |
– thickness of brake shoes, mm |
5 |
– diameter of the cylinder, mm |
19,05 |
Back disk brakes
|
– diameter of a brake disk, mm |
262 |
– thickness of a brake disk, mm |
10 |
– thickness of brake shoes, mm |
10 |
– diameter of the cylinder, mm |
34 |
Anti-blocking system of brakes
|
ECU control unit
|
– supply voltage, In |
10–16
|
– range of temperatures, °C |
– 40 … 110 |
Control lamp: W/ABS, TCS, TCS OFF, EBD
|
– supply voltage, In |
12 |
– a consumed current, мА |
80 |
Sensor of frequency of rotation of a wheel
|
– resistance, Ohm |
1275–1495
|
– target tension, In |
0,15–50
|
– air gap, mm |
0,2–1,2 |
Hydraulic HECU block
|
– weight, kg |
3,0
|
– engine |
12 IN, 35 AND
|
– engine capacity, W |
180
|
– productivity, cm3 / with |
5,5 |
Adjusting data
Height of installation of a pedal of a brake, mm |
176±0,3 |
Gap of the switch of stoplights, mm |
0,5–1,0 |
Free wheeling of a pedal of a brake, mm |
3–8 |
Distance from the pressed pedal of a brake to a floor, mm |
44 |
Gap between a pusher of the vacuum amplifier of brakes and the main brake cylinder, mm |
0 |
Course of the lever of the parking brake at a tightening its effort of 196 N |
8–9 clicks |
Minimum admissible thickness of overlays of forward brake shoes, mm |
2,0 |
Minimum admissible thickness of a brake disk, mm |
22,4 |
Palpation of a brake disk, mm |
0,08 |
Minimum admissible difference of thickness of a brake disk, mm |
0,01 |
Minimum admissible thickness of overlays of back brake shoes, mm |
1,5 |
The most admissible diameter of boring of a brake drum, mm |
229,6 |
The most admissible gap of the piston in the working brake cylinder, mm |
0,15 |
Minimum admissible thickness of overlays of back disk brake shoes, mm |
2,0 |
Lubricants
Brake liquid |
DOT 3 or equivalent |
Plug and bolt of a pedal of a brake |
SAE J 310, NLGI No. 0 lubricant |
Pin with a head and an opening under шплинт |
SAE J 310, NLGI No. 2 lubricant |
Contact surfaces of a basic plate |
Lubricant for NLGI No. 0 bearings |
Mobile elements of a ratchet or ratchet doggie. |
SAE J 310, NLGI No. 2 lubricant |
Moments of an inhaling, N • m
Nuts of fastening of the main brake cylinder to an arm |
8–12 |
Nuts of fastening of an arm of the main brake cylinder |
13–16 |
The union of a vacuum hose to the air broad chamber |
15–18 |
Pumping union |
7–13 |
Connecting nuts of brake tubes |
13–17 |
The pressure limiter to the main brake cylinder |
35–55 |
Bolt of the directing plug of a support |
22–32 |
Bolts of fastening of a support to a rotary fist |
69–85 |
Hollow bolt of fastening of a brake hose to a forward support |
25–35 |
Bolts of fastening of the working brake cylinder |
12–18 |
Forward sensor of frequency of rotation of a wheel |
8–9,5 |
Back sensor of frequency of rotation of a wheel |
15,5–16,5 |
Bolts of fastening of the ECU control unit and hydraulic HECU block |
8–10 |
Bolts of fastening of arms of the ECU control unit and hydraulic HECU block |
9–10 |
Six brake tubes to the hydraulic block |
13–17 |
|
|