Vacuum amplifier of brakes. KIA Magentis/Optima (since 2000 of release)
Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
12.1. Specifications
12.2. Anti-blocking system of brakes
12.3. Check and adjustment of provision of a pedal of a brake
12.4. Check of the vacuum amplifier of brakes
12.5. Pumping of hydraulic system of a drive of brakes
12.6. Pumping of hydraulic system of a drive of brakes with scanner use
12.7. Adjustment of a course of the parking brake
12.8. Brake pedal
12.9. Main brake cylinder
12.10. Vacuum amplifier of brakes
12.11. Brake tubes and hoses
12.12. Pressure regulator
12.13. Replacement of forward brake shoes
12.14. Support of a forward brake
12.15. Back drum-type brakes
12.16. Replacement of the working brake cylinder
12.17. Back disk brakes
12.18. Support
12.19. Hydraulic HECU block (the hydraulic and electronic control device)
12.20. Sensor of frequency of rotation of a wheel
12.21. Parking brake
12.22. Search and elimination of malfunctions
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










12-10-vakuumnyjj-usilitel-tormozov.html

12.10. Vacuum amplifier of brakes

Removal

 PERFORMANCE ORDER

1. Disconnect brake tubes and remove the main brake cylinder.

2. Disconnect a vacuum hose from the vacuum amplifier of brakes.
3. In salon of the car remove spring шплинт, and remove a pin with a head and an opening under шплинт.

4. Unscrew four nuts and with нимите the vacuum amplifier of brakes.

Installation

 PERFORMANCE ORDER

1. Establish the main brake cylinder.
2. Establish the vacuum amplifier of brakes / the main brake cylinder with new laying on a partition of a motor compartment and fix four nuts.
3. From a motor compartment attach a vacuum hose to the vacuum amplifier of brakes.
4. Connect draft to a pedal of a brake and establish a pin with a head and an opening under шплинт and fix its new spring the shplinty.
5. Fill a tank of brake system with brake liquid. Remove air from a hydraulic contour of brake system.

Do not try to repair the vacuum amplifier of brakes, as it not folding type.


«on a step back
12.9. Main brake cylinder
on the following page»
12.11. Brake tubes and hoses