Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
12.1. Specifications
12.2. Anti-blocking system of brakes
12.3. Check and adjustment of provision of a pedal of a brake
12.4. Check of the vacuum amplifier of brakes
12.5. Pumping of hydraulic system of a drive of brakes
12.6. Pumping of hydraulic system of a drive of brakes with scanner use
12.7. Adjustment of a course of the parking brake
12.8. Brake pedal
12.9. Main brake cylinder
12.10. Vacuum amplifier of brakes
12.11. Brake tubes and hoses
12.12. Pressure regulator
12.13. Replacement of forward brake shoes
12.14. Support of a forward brake
12.15. Back drum-type brakes
12.16. Replacement of the working brake cylinder
12.17. Back disk brakes
12.18. Support
12.19. Hydraulic HECU block (the hydraulic and electronic control device)
12.20. Sensor of frequency of rotation of a wheel
12.21. Parking brake
12.22. Search and elimination of malfunctions
13. Body
14. Central air
15. Electric equipment
16. Electric circuits


12.11. Brake tubes and hoses


1. Check brake hoses on lack of cracks and a local vspuchivaniye. If necessary, replace a brake hose.
2. Check brake tubes on lack of cracks, damages and corrosion.
3. Check connecting nuts of brake hoses on absence of damages and leak.



1. Establish brake tubes, without overwinding them.
2. It is necessary to establish brake hoses as it is possible further from welded seams, sides or mobile parts of the car.
3. Tighten all connections by the demanded moments of an inhaling.

    Moment of an inhaling of connecting nuts: 13–17 N • m The moment of an inhaling of brake hoses to forward supports: 25–30 N • m

«on a step back
12.10. Vacuum amplifier of brakes
on the following page»
12.12. Pressure regulator