Adjustment of a course of the parking brake. KIA Magentis/Optima (since 2000 of release)
Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
12.1. Specifications
12.2. Anti-blocking system of brakes
12.3. Check and adjustment of provision of a pedal of a brake
12.4. Check of the vacuum amplifier of brakes
12.5. Pumping of hydraulic system of a drive of brakes
12.6. Pumping of hydraulic system of a drive of brakes with scanner use
12.7. Adjustment of a course of the parking brake
12.8. Brake pedal
12.9. Main brake cylinder
12.10. Vacuum amplifier of brakes
12.11. Brake tubes and hoses
12.12. Pressure regulator
12.13. Replacement of forward brake shoes
12.14. Support of a forward brake
12.15. Back drum-type brakes
12.16. Replacement of the working brake cylinder
12.17. Back disk brakes
12.18. Support
12.19. Hydraulic HECU block (the hydraulic and electronic control device)
12.20. Sensor of frequency of rotation of a wheel
12.21. Parking brake
12.22. Search and elimination of malfunctions
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










12-7-regulirovka-khoda-stoyanochnogo-tormoza.html

12.7. Adjustment of a course of the parking brake

 PERFORMANCE ORDER

1. Weaken a cable of the parking brake, rotating an adjusting nut counter-clockwise.

2. Press a pedal of a brake of 20 times with effort about 196 N.
3. Pull a cable of the parking brake, rotating an adjusting nut clockwise.
4. Check number of clicks at a tightening of the lever of the parking brake effort of 196 N.

Course of the lever of the parking brake : 8–9 clicks

5. If the number of clicks differs from demanded, adjust length of a cable, rotating an adjusting nut on the jack of cables.
6. Include ignition, lift the lever of the parking brake on one click and check that the control lamp of the parking brake in a combination of devices lit up.

7. Check that back brakes reliably hold the car on the inclined plane.


«on a step back
12.6. Pumping of hydraulic system of a drive of brakes with scanner use
on the following page»
12.8. Brake pedal