Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
12.1. Specifications
12.2. Anti-blocking system of brakes
12.3. Check and adjustment of provision of a pedal of a brake
12.4. Check of the vacuum amplifier of brakes
12.5. Pumping of hydraulic system of a drive of brakes
12.6. Pumping of hydraulic system of a drive of brakes with scanner use
12.7. Adjustment of a course of the parking brake
12.8. Brake pedal
12.9. Main brake cylinder
12.10. Vacuum amplifier of brakes
12.11. Brake tubes and hoses
12.12. Pressure regulator
12.13. Replacement of forward brake shoes
12.14. Support of a forward brake
12.15. Back drum-type brakes
12.16. Replacement of the working brake cylinder
12.17. Back disk brakes
12.18. Support
12.19. Hydraulic HECU block (the hydraulic and electronic control device)
12.20. Sensor of frequency of rotation of a wheel
12.21. Parking brake
12.22. Search and elimination of malfunctions
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 








.

12-8-pedal-tormoza.html

12.8. Brake pedal

Removal

 PERFORMANCE ORDER

1. Remove the bottom panel from the dashboard.
2. Remove a returnable spring from a brake pedal.
3. Remove an arm of support of a steering.
4. Remove the switch of stoplights and disconnect the socket of the switch of coupling (on cars with an automatic transmission).
5. Remove шплинт and remove a pin with a head and an opening under шплинт.
6. Separate a stopper and a washer on the right side of a pedal arm.
7. Turn out a nut and remove on the right side of a pedal supporting element.
8. Remove a brake pedal, the plug and a wavy washer.
9. Turn out a bolt on the left side of a pedal and remove supporting element.

Check

 PERFORMANCE ORDER

1. Check the plug on lack of wear.
2. Check a brake pedal on lack of curvatures.
3. Check a spring of return of a pedal of a brake on absence of damages.

Installation

 PERFORMANCE ORDER

1. Installation is carried out to sequences, return to removal.

  1. On an internal surface of plugs put lubricant.
    Lubricant: SAE J310, NLGI No. 0
  2. Before pin installation with a head and an opening under шплинт put on it and a washer lubricant.

«on a step back
12.7. Adjustment of a course of the parking brake
on the following page»
12.9. Main brake cylinder