13.21. Screen wiper lever

1. Switch on and off a windscreen screen wiper in order that screen wiper levers with brushes stopped in a starting position.
2. Uncover and turn out a nut of fastening of the lever of a screen wiper.
3. Check that on the screen wiper lever from the driver there is a designation of "Dr" (Driver Side), and on the lever from the forward passenger – designation of "As" (Passenger Side). In the absence of designations, put them.

1. Since the party of the forward passenger, establish the screen wiper lever on a hinge axis.
2. Screw a nut of fastening of the lever.

3. Establish a cover of a nut and check a zone of movement of brushes on a windscreen. The screen wiper lever from the driver should stop at distance of 30 mm from the glass basis, and the screen wiper lever from the forward passenger – at distance of 37 mm from the glass basis.