Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
13.1. Specifications
13.2. Front bumper
13.3. Rear bumper
13.4. Cowl
13.5. Sound signal
13.6. Relay of a sound signal
13.7. External lighting devices
13.8. Headlight
13.9. Top stoplight
13.10. External section of the back combined lamp
13.11. Internal section of the back combined lamp
13.12. Replacement of lamps of a headlight
13.13. Replacement of lamps of the top stoplight
13.14. Replacement of lamps of a lamp of illumination of registration plate
13.15. Replacement of lamps of external section of the back combined lamp
13.16. Replacement of lamps of internal section of the back combined lamp
13.17. Screen wiper and windscreen washer
13.18. Hoses of a washer of a windscreen
13.19. Engine of a washer of a windscreen
13.20. Sprays
13.21. Screen wiper lever
13.22. Replacement of brushes of a screen wiper
13.23. Drafts of a screen wiper
13.24. Screen wiper engine
13.25. Forward door
13.26. Window regulators
13.27. Vlagozashchitnoye door consolidation
13.28. Hinges of a door and shock plate of the lock of a door
13.29. Back door
13.30. Trunk lid
13.31. Trunk lid lock
13.32. Overlay of a trunk lid
13.33. Combination of devices
13.34. Repair of a combination of devices
13.35. Switches
13.36. Dashboard
13.37. Control panel heating and ventilation
13.38. Air lines
13.39. Floor air lines
13.40. Sitting lobbies
13.41. Back of forward sitting
13.42. Pillow of forward sitting
13.43. Back sitting
13.44. Seat belts
13.45. Buckle of forward sitting
13.46. Forward humeral seat belt
13.47. Seat belts of back sitting
13.48. Buckle of a back seat belt
13.49. Humeral back seat belt
13.50. Aerial
13.51. Top furnish of a forward rack
13.52. Bottom furnish of the central rack
13.53. Top furnish of the central rack
13.54. Search and elimination of malfunctions
14. Central air
15. Electric equipment
16. Electric circuits
 










13-26-steklopodemniki.html

13.26. Window regulators

Window regulators with an electric drive provide a remote raising and lowering of glasses of lobbies and back doors. Each window regulator is put in action by the reversive electric motor. Engines of window regulators cope the switches established on lobbies and back doors. On a door of the driver the main switch which operates window regulators of all doors is established.

Removal

 PERFORMANCE ORDER

1. Disconnect a wire from the negative plug of the storage battery.
2. Remove a decorative overlay of a door.

  1. Disconnect a decorative overlay of a door.
  2. Disconnect the electric socket.

3. Uncover the internal handle.

  1. Turn out one screw.
  2. Uncover the internal handle.

4. Remove door furnish.

 

  1. Turn out one screw from a handle arm.
  2. Turn out two screws on the right side of door furnish.
  3. Turn out two screws and uncover on the left side of door furnish.
  4. Turn out two screws from the basis of furnish of a door.
  5. Separate door furnish from a door.
  6. Disconnect the electric socket.

5. Remove the internal handle of opening of a door.

  1. Disconnect two drafts from the door lock.
  2. Turn out two screws of fastening of the handle of a door.

6. Turn out two screws of fastening of an arm of the handle.

7. Remove a pylevlagozashchitny film, gradually separating it from a door frame.

Remove a pylevlagozashchitny film very accurately in order that it could be reused.

8. Remove glass.

  • Repeatedly connect the socket to the window regulator switch.
  • Connect a wire to the negative plug of the storage battery.
  • Include ignition and move glass to half-open situation.
  • Switch off ignition.
  • Remove directing glasses.
  • Turn out two bolts of fastening of glass to a window regulator.
  • Inclining and lifting a back part, remove glass from the outer side of a door.
  • Disconnect a wire from the negative plug of the storage battery.

9. Remove a window regulator.

  1. Disconnect the socket from the window regulator engine.
  2. Turn out seven nuts of fastening of a window regulator to a door.
  3. Through an opening in the internal panel of a door remove a window regulator.

10. Remove the door lock.

  1. Disconnect two drafts from the external handle of a door.
  2. Disconnect the socket from the modulator of the lock of a door.
  3. Turn out two nuts of fastening of the modulator of the lock of a door.
  4. Turn out one screw of fastening of a cover of draft of the internal handle of a door.
  5. Turn out three screws and remove the door lock.

11. Remove the external handle of a door.

  • Disconnect the socket from the cylinder of the lock of a door.
  • Turn out two assembly bolts of fastening of the external handle of a door.
  • Remove the cylinder of the lock of a door from the external handle of a door.
  • Press the handle down (A) and turn the lower part of the handle outside and up (B).

12. Turn out two nuts of fastening directing glasses.

13. Remove from a door the loudspeaker.

  1. Disconnect the electric socket.
  2. Turn out four screws of fastening of loudspeaker to a door.

14. Remove an external rear-view mirror.

  1. Disconnect the electric socket.
  2. Turn out three screws and remove a mirror.

15. Remove a plait of wires.

  1. Disconnect sockets of a plait of wires from a door frame.
  2. Take a plait of wires through an opening in the internal panel of a door.
16. Turn out a bolt of fastening of the limiter of opening of a door to a body.

17. Turn out bolts of fastening of both hinges and remove a door from the car.

Installation

 PERFORMANCE ORDER

1. Establish a door.

  • Establish properly a door on the car
  • Screw bolts of fastening of both hinges.

Inhaling moment: 13–26 N • m

2. Establish vlagozashchitny consolidation of a door.
3. Screw a bolt of fastening of the limiter of opening of a door to a body.

Inhaling moment: 17–22 N • m

4. Establish a plait of wires.

  • Insert a plait of wires through an opening in the internal panel of a door.
  • Fix plait sockets on a door frame

5. Establish an external rear-view mirror.

  1. Establish an external rear-view mirror on a door in initial situation.
  2. Fix a mirror three bolts.
  3. Connect the electric socket.

6. Establish the loudspeaker.

  1. Establish the loudspeaker on a door in initial situation.
  2. Fix the loudspeaker four screws.
  3. Connect the electric socket.

7. Establish directing glasses.

  1. Establish directing glasses through an opening in the internal panel of a door.
  2. Fix directing glasses two nuts.

8. Establish the external handle of a door.

  1. Establish the external handle of a door through an opening in the internal panel of a door in initial situation.
  2. Establish the cylinder of the lock of a door on the external handle of a door.
  3. Screw two assembly bolts of fastening of the external handle of a door.
    Inhaling moment: 7–11 N • m
  4. Connect the socket to the cylinder of the lock of a door.

9. Put the door lock.

  1. Put the door lock through an opening in the internal panel of a door.
  2. Fix the door lock three screws.
    Inhaling moment: 8–11 N • m
  3. Screw one screw of fastening of a cover of draft of the internal handle.
  4. Screw two assembly nuts of fastening of the modulator of the lock of a door.
  5. Connect two bent for to the external handle of a door.
  6. Connect the socket to the modulator of the lock of a door.

10. Establish a window regulator.

  1. Establish a window regulator through an opening in the internal panel of a door.
  2. Fix a window regulator seven nuts.
  3. Connect to the window regulator engine the electric socket.

11. Establish glass. Insert outside of a door at first a forward part of glass, then, turning and lowering, establish glass at a door and arrange it on a window regulator arm.

  1. Screw, but do not tighten finally, two bolts of fastening of glass.
  2. Repeatedly connect the switch of management of a window regulator.
  3. Connect a wire to the negative plug of the storage battery.
  4. Include ignition and move glass up and down to intensify function of management by a window regulator.
  5. If necessary, adjust the provision of glass.
  6. Switch off ignition.
  7. Disconnect the switch of management of a window regulator.
  8. Disconnect a wire from the negative plug of the storage battery.
  9. Tighten two bolts of fastening of glass to a window regulator.

    Inhaling moment: 8–12 N • m

12. Establish directing sealant of glass. For simplification of installation use soap water.
13. Establish on a door a pylevlagozashchitny film.

  1. Fix a pylevlagozashchitny film on a door.
  2. Deduce from a pylevlagozashchitny film the electric socket of a plait of wires of a door.
  3. Deduce from a pylevlagozashchitny film draft of the internal handle of opening of the lock of a door.

14. Establish an arm of the handle and fix it two screws.

15. Establish the internal handle of a door.

  1. Fix the handle two screws.
  2. Connect to the handle two drafts of the lock of a door.

16. Establish door furnish.

  1. Connect the electric socket.
  2. Establish into place door furnish.
  3. Screw two screws of fastening of the basis of furnish of a door.
  4. Establish a cover on the left side of furnish of a door and fix it two screws.
  5. Screw two screws of fastening of the right side of furnish of a door.
  6. Screw one screw of fastening of an arm of the handle.

17. Establish a cover of the internal handle of a door.

  1. Establish a cover of the internal handle of a door.
  2. One screw fix a cover of the internal handle of a door.

18. Establish a decorative overlay of a door.
19. Connect a wire to the negative plug of the storage battery.


«on a step back
13.25. Forward door
on the following page»
13.27. Vlagozashchitnoye door consolidation