13.29. Back door

3. Uncover the internal handle.

1. Turn out one screw of fastening of an arm of the internal handle of opening of a door.
2. Uncover the internal handle.

4. Remove door furnish.

1. Turn out one screw from a handle arm.
2. Remove covers and turn out two screws on the left side of door furnish.
3. Turn out two screws on the right side of door furnish.
4. Separate door furnish from a door.
5. Disconnect the electric socket from the switch of window regulators.

5. Remove the internal handle of opening of a door.

1. Disconnect two drafts from the door lock.
2. Turn out two screws of fastening of the handle of a door.

6. Turn out two screws of fastening of an arm of the handle.

Remove a pylevlagozashchitny film very accurately in order that it could be reused.

8. Remove an external vlagozashchitny strip and a decorative overlay of a door.

1. Turn out three screws of fastening of a decorative overlay of a door.
2. Separate an external vlagozashchitny strip from outer side of a door.

9. Remove glass.

1. Repeatedly connect the socket to the window regulator switch.
2. Connect a wire to the negative plug of the storage battery.
3. Include ignition and move glass to half-open situation.
4. Switch off ignition.
5. Remove directing glasses.
6. Turn out two bolts of fastening of glass to a window regulator.
7. Inclining and lifting a back part, remove glass from the outer side of a door.
8. Disconnect a wire from the negative plug of the storage battery.

10. Remove a window regulator.

1. Disconnect the socket from the window regulator engine.
2. Turn out seven nuts of fastening of a window regulator to a door.
3. Through an opening in the internal panel of a door remove a window regulator.

11. Remove the door lock.

1. Unscrew one nut from the external handle of a door.
2. Disconnect the socket from the modulator of the lock of a door.
3. Turn out two nuts of fastening of the modulator of the lock of a door.
4. Turn out three screws and through an opening in the internal panel of a door remove the door lock.

12. Remove the external handle of a door.

• Turn out two bolts of fastening of the external handle of a door.

• Press the handle down (A) and turn the lower part of the handle outside and up (B).

13. Turn out two bolts of fastening directing glasses.

15. Turn out a bolt of fastening of the limiter of opening of a door to a body.

16. Turn out bolts of fastening of both hinges and remove a door from the car.

5. Establish directing glasses.

1. Establish directing glasses through an opening in the internal panel of a door.
2. Fix directing glasses two bolts.

6. Establish the external handle of a door.

1. Establish the external handle of a door through an opening in the internal panel of a door in initial situation.
2. Screw two bolts of fastening of the external handle of a door.

Inhaling moment: 7–11 N • m

7. Put the door lock.

1. Put the door lock through an opening in the internal panel of a door.
2. Fix the door lock three screws.
   Inhaling moment: 8–11 N • m
3. Connect the socket to the modulator of the lock of a door
4. Screw two assembly nuts of fastening of the modulator of the lock of a door.
5. Connect bent for to the external handle of a door.

8. Establish a window regulator.

1. Establish a window regulator through an opening in the internal panel of a door.
2. Fix a window regulator seven nuts.
3. Connect to the window regulator engine the electric socket.

11. Establish glass.

1. Insert outside of a door at first a forward part of glass, then, turning and lowering, establish glass at a door and arrange it on a window regulator arm. Screw, but do not tighten finally, two bolts of fastening of glass.
2. Repeatedly connect the switch of management of a window regulator.
3. Connect a wire to the negative plug of the storage battery.
4. Include ignition and move glass up and down to intensify function of management by a window regulator.
5. If necessary, adjust the provision of glass.
6. Switch off ignition.
7. Disconnect the switch of management of a window regulator.
8. Disconnect a wire from the negative plug of the storage battery.
9. Tighten two bolts of fastening of glass to a window regulator.

Inhaling moment: 8–12 N • m

11. Establish an external vlagozashchitny strip and a decorative overlay of a door.

1. Fix an external vlagozashchitny strip from outer side of a door.
2. Screw three screws of fastening of a decorative overlay of a door.

13. Establish an arm of the handle and fix it two screws.

14. Establish the internal handle of a door.

1. Fix the handle two screws.
2. Connect to the handle two drafts of the lock of a door.

15. Establish door furnish.

1. Connect the electric socket.
2. Establish into place door furnish.
3. Establish a cover on the left side of furnish of a door and fix it two screws.
4. Screw one screw of fastening of the right side of furnish of a door.

16. Screw one screw of fastening of an arm of the handle.