Trunk lid. KIA Magentis/Optima (since 2000 of release)
Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
13.1. Specifications
13.2. Front bumper
13.3. Rear bumper
13.4. Cowl
13.5. Sound signal
13.6. Relay of a sound signal
13.7. External lighting devices
13.8. Headlight
13.9. Top stoplight
13.10. External section of the back combined lamp
13.11. Internal section of the back combined lamp
13.12. Replacement of lamps of a headlight
13.13. Replacement of lamps of the top stoplight
13.14. Replacement of lamps of a lamp of illumination of registration plate
13.15. Replacement of lamps of external section of the back combined lamp
13.16. Replacement of lamps of internal section of the back combined lamp
13.17. Screen wiper and windscreen washer
13.18. Hoses of a washer of a windscreen
13.19. Engine of a washer of a windscreen
13.20. Sprays
13.21. Screen wiper lever
13.22. Replacement of brushes of a screen wiper
13.23. Drafts of a screen wiper
13.24. Screen wiper engine
13.25. Forward door
13.26. Window regulators
13.27. Vlagozashchitnoye door consolidation
13.28. Hinges of a door and shock plate of the lock of a door
13.29. Back door
13.30. Trunk lid
13.31. Trunk lid lock
13.32. Overlay of a trunk lid
13.33. Combination of devices
13.34. Repair of a combination of devices
13.35. Switches
13.36. Dashboard
13.37. Control panel heating and ventilation
13.38. Air lines
13.39. Floor air lines
13.40. Sitting lobbies
13.41. Back of forward sitting
13.42. Pillow of forward sitting
13.43. Back sitting
13.44. Seat belts
13.45. Buckle of forward sitting
13.46. Forward humeral seat belt
13.47. Seat belts of back sitting
13.48. Buckle of a back seat belt
13.49. Humeral back seat belt
13.50. Aerial
13.51. Top furnish of a forward rack
13.52. Bottom furnish of the central rack
13.53. Top furnish of the central rack
13.54. Search and elimination of malfunctions
14. Central air
15. Electric equipment
16. Electric circuits
 










13-30-kryshka-bagazhnika.html

13.30. Trunk lid

The trunk lid fastens to a body two hinges. Two hinges are connected with each other by two support of the shock-absorber and fixed by bolts.

Two hinges connected by two support of the shock-absorber help to open and hold a trunk lid in open situation.

The shock plate holds a trunk lid in a closed position.

The Vlagozashchitny strip of a trunk lid prevents moisture and dust hit in a luggage carrier. The latch is attached in the center of the basis of a trunk lid. The provision of a trunk lid can be regulated.

Removal

 PERFORMANCE ORDER

Removal of a trunk lid carry out with the assistant.

1. Remove the top and bottom clips from shock-absorber support.

2. Remove a shock-absorber support from the hinge.

3. Remove a cap and disconnect the electric socket of a plait of wires.
4. Support a trunk lid in open situation.

5. Turn out four bolts of fastening of hinges of a trunk lid and with нимите a trunk lid.

Installation

 PERFORMANCE ORDER

Installation of a trunk lid carry out with the assistant.

1. Installation is carried out to sequences, return to removal.
2. By hand tighten bolts of fastening of hinges of a trunk lid.
3. Close a trunk lid.

4. Check, and if necessary, adjust the provision of a trunk lid of rather adjacent surfaces before a tightening of bolts.

Inhaling moment: 7–11 N • m

5. Check mutual position of the lock of a trunk lid and a shock plate of the lock. If necessary, weaken bolts and, moving a shock plate, adjust its situation.

Inhaling moment: 7–11 N • m

«on a step back
13.29. Back door
on the following page»
13.31. Trunk lid lock