Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
13.1. Specifications
13.2. Front bumper
13.3. Rear bumper
13.4. Cowl
13.5. Sound signal
13.6. Relay of a sound signal
13.7. External lighting devices
13.8. Headlight
13.9. Top stoplight
13.10. External section of the back combined lamp
13.11. Internal section of the back combined lamp
13.12. Replacement of lamps of a headlight
13.13. Replacement of lamps of the top stoplight
13.14. Replacement of lamps of a lamp of illumination of registration plate
13.15. Replacement of lamps of external section of the back combined lamp
13.16. Replacement of lamps of internal section of the back combined lamp
13.17. Screen wiper and windscreen washer
13.18. Hoses of a washer of a windscreen
13.19. Engine of a washer of a windscreen
13.20. Sprays
13.21. Screen wiper lever
13.22. Replacement of brushes of a screen wiper
13.23. Drafts of a screen wiper
13.24. Screen wiper engine
13.25. Forward door
13.26. Window regulators
13.27. Vlagozashchitnoye door consolidation
13.28. Hinges of a door and shock plate of the lock of a door
13.29. Back door
13.30. Trunk lid
13.31. Trunk lid lock
13.32. Overlay of a trunk lid
13.33. Combination of devices
13.34. Repair of a combination of devices
13.35. Switches
13.36. Dashboard
13.37. Control panel heating and ventilation
13.38. Air lines
13.39. Floor air lines
13.40. Sitting lobbies
13.41. Back of forward sitting
13.42. Pillow of forward sitting
13.43. Back sitting
13.44. Seat belts
13.45. Buckle of forward sitting
13.46. Forward humeral seat belt
13.47. Seat belts of back sitting
13.48. Buckle of a back seat belt
13.49. Humeral back seat belt
13.50. Aerial
13.51. Top furnish of a forward rack
13.52. Bottom furnish of the central rack
13.53. Top furnish of the central rack
13.54. Search and elimination of malfunctions
14. Central air
15. Electric equipment
16. Electric circuits
 










13-4-kapot.html

13.4. Cowl

The cowl of alligator type opening from the forward party of the car and being locked standard double unlocking mechanism. The handle of opening of the lock of a cowl is located on the left side in the bottom of the dashboard. When opening the cowl turns on two hinges and is fixed in open situation by a support. Each hinge fastens two bolts to a body and two bolts to a cowl. For adjustment of provision of a cowl, it can move at the expense of the extended openings for bolts of fastening of hinges of a cowl. The latch of a cowl can be adjusted in two planes for ensuring optimum position of the lock of a cowl and a shock plate.

Removal

 PERFORMANCE ORDER

1. Open a cowl and fix it on a support.
2. Support a cowl so that it did not fall after a reversing of bolts of fastening of hinges.

Removal of a cowl carry out with assistants.


3. Remove cowl hinges, having turned out one nut and three bolts.

4. Separate a cowl support from a cowl.
5. Remove a cowl.

Installation

 PERFORMANCE ORDER

Installation of a cowl carry out with assistants.

1. Installation is carried out to sequences, return to removal.
2. By hand tighten one nut and three bolts of fastening of a cowl.
3. Lower and close a cowl.

4. Check gaps on cowl perimeter. If necessary, moving a cowl in the extended openings for bolts of fastening of a cowl, adjust the provision of a cowl so that gaps on perimeter were uniform and corresponded to demanded values. After situation adjustment, tighten bolts of fastening of a cowl.

Inhaling moment: 22–27 N • m

5. Check alignment of a latch and a shock plate of a cowl. If necessary, weaken bolts and, moving, adjust the provision of a shock plate of a cowl.

Inhaling moment: 7–11 N • m


«on a step back
13.3. Rear bumper
on the following page»
13.5. Sound signal