13-43-zadnee-sidenie.html
13.43. Back sittingThe back seat consists of two separate back backs and one general pillow. The frame of sitting fastens on two hinges. Two lateral arms are attached by bolts to the car case.
Two backs of a seat are attached on arms with hinges.
In the normal provision of a back of a seat are fixed by locks to the shock plates fixed on a body.
Removal
|
1. Turn out two bolts from a pillow of back sitting.
|
2. Press the clamp button, as is shown in drawing, release and lift a pillow of back sitting. |
3. Turn out two bolts of fastening of the left lateral arm.
|
4. Turn out two bolts of fastening of the right lateral arm. |
5. Press the button and reject forward a back of back sitting. 6. Turn out four bolts of fastening of the right, left and central hinges of a back of back sitting. 7. Turn out one bolt of fastening of the left lateral arm. 8. Turn out one bolt of fastening of the right lateral arm. 9. Remove the left and right arms. 10. Remove the left back of sitting. 11. Remove the right back of sitting.
|
|
Installation
|
Installation is carried out to sequences, return to removal.
Inhaling moment: 17–26 N • m
|
|
|
|