|
13-7-vneshnie-osvetitelnye-pribory.html
13.7. External lighting devices
External lighting devices
External lighting devices consist of six systems of lighting: headlights, lamps of a signal of turn, dimensional lighting, alarm light system, stoplights and lamp of illumination of registration plate (only back part). Lamps of all six systems are located in the left and right headlights, the left and right back lamps, a back top stoplight and two lamps of illumination of registration plate. All lighting eats 12-voltny electric system and copes the driver.
Back lamps
Back lamps are executed in such a manner that aerodynamically continue a body form. Rasseivatel of a lamp has three colors: the amber – turn / the alarm light system, translucent – reserve, red – dimensional a lighting / brakes. Back lamps contain on four filament lamps. Two lamps – with one thread of an incandescence also are intended for a turn signal / the alarm light system and a backing. Two lamps with two threads of an incandescence are intended for stoplights and dimensional illumination of the Lamp fasten on the plastic holder. For replacement of filament lamps the holder of lamps acts in film from within the car.
The lamp of a stoplight joins the switch established about a pedal of a brake and put in action by pressing a pedal of a brake.
Lamps of a backing join the switch established on a transmission. At inclusion of transfer of a backing, contacts of the switch become isolated, therefore backing lamps light up.
Lamps of a signal of turn join the combined switch established on a steering column. The alarm light system turns on the switch located on the center on the dashboard. The breaker of indexes of turn / the alarm light system is located under the dashboard on the left side.
Headlights
Headlights are executed in such a manner that aerodynamically continue a body form. The headlight fastens to a body two bolts.
Each headlight contains three filament lamps. One filament lamp with two threads of an incandescence serves for a passing beam of headlights and dimensional lighting. A lamp with one thread of an incandescence of halogen type. Ring consolidation is isolated by the holder of the filament lamp to exclude hit in a moisture and dust headlight. Replacement of a lamp is carried out from a motor compartment, without removing a headlight. In each headlight light adjustment in the horizontal and vertical planes is provided. On two adjusting screws to each headlight are available through the openings located behind over headlights.
Two other filament lamps are intended for the turn index / the alarm light system and dimensional lighting.
Lamps of a signal of turn join the combined switch established on a steering column. The alarm light system turns on the switch located on the center on the dashboard.
Back top stoplight
The plafond of a back top stoplight of red color also is well visible through back glass. The back top stoplight has one lamp.
The lamp of a stoplight joins the switch established about a pedal of a brake and put in action by pressing a pedal of a brake.
Lamp of illumination of registration plate
Two lamps of illumination of registration plate are established in a trunk lid. In each lamp it is established on one lamp. Lamps join together inclusion of dimensional lighting. Each filament lamp is protected by the translucent plastic lens fixed by two screws. For replacement of a lamp it is necessary to remove a transparent lens which fastens two screws.
|