|
15-22-stekloochistitel-i-stekloomyvatel-vetrovogo-stekla.html
15.22. Screen wiper and stekloomyvatel of a windscreen
Removal
|
|
|
|
1. Remove covers and turn out nuts of fastening of levers of a screen wiper. Remove screen wiper levers.
|
|
At removal of levers of screen wipers do not scratch a cowl. |
|
|
|
3. Unscrew nuts, release clips and uncover the ventilating chamber located in the basis of a windscreen. Disconnect the socket and remove the engine and drafts of a screen wiper. |
|
|
Check of frequency of work of a screen wiper
|
|
| 1. Disconnect the socket from the screen wiper engine.
2. Additional wires connect the positive plug of the storage battery to the socket plug 6, and the negative plug – to the plug 3.
3. Be convinced that the engine of a screen wiper works at low frequency of rotation.
4. Additional wires connect the positive plug of the storage battery to the socket plug 6, and the negative plug – to the plug 2.
|
|
5. Be convinced that the engine of a screen wiper works at high frequency of rotation. |
|
|
Check of an automatic stop of brushes in an initial condition
|
|
| 1. Turn on the engine on low frequency of rotation.
2. Having disconnected a wire from the plug 3 sockets, stop the engine in any situation, except the initial.
3. Connect socket plugs 3 and 5.
4. Additional wires connect the positive plug of the storage battery to the socket plug 6, and the negative plug – to the plug 1.
|
|
5. Check that the engine of a screen wiper is switched off in a starting position of brushes of a screen wiper. |
|
|
Check of operation of the engine of a stekloomyvatel
|
|
|
1. With the engine of a stekloomyvatel connected to a washer tank, fill a tank of a stekloomyvatel with water.
|
|
2. Additional wires connect the positive plug of the storage battery to the plug 2 sockets, and the negative plug – to the plug 1, thus the engine should work, and the pump to swing water. |
|
|
|
|