15-25-podushka-bezopasnosti-voditelya-i-spiralnyjj-provod.html
15.25. Safety cushion of the driver and spiral wire
Removal
|
|
1. Disconnect a wire from the negative plug of the storage battery.
|
Before service of system of safety cushions be convinced that passed not less than 30 with the ambassador of switching off of ignition and a wire detachment from the negative plug of the storage battery.
|
|
|
2. Uncover a steering wheel and verify bolts of fastening of a safety cushion of the driver. |
|
3. At a detachment of the electric socket of a spiral wire of a safety cushion establish the lock device on the socket, directed outside.
At a detachment of the electric socket of a spiral wire from a safety cushion do not apply big efforts.
The removed safety cushion is necessary for storing in a pure dry place, the face up.
|
|
4. Remove a steering wheel.
|
Do not knock on a steering wheel as it can damage the protective mechanism of a steering column and reduce extent of protection of the driver at a head-on collision.
|
|
|
|
Safety cushion check
In the presence of any defects it is necessary to replace a safety cushion.
|
|
Do not try to measure resistance of an electric chain of a pyrotechnic gas generator of a safety cushion, as probably unauthorized expansion of a safety cushion of the driver.
|
1. Check a safety cushion cover on lack of dents, cracks or deformation. 2. Check a safety cushion on absence of cave-in, splitting or deformation. 3. Check a condition of hooks and sockets on absence of damages, oxidations of contacts of the socket and damages of a plait of wires.
|
4. Check the case of a pyrotechnic gas generator of a safety cushion on lack of dents, cracks or deformation. |
|
5. Put a safety cushion to a steering wheel to check its combination and suitability. |
|
|
Check of a spiral wire (spring)
In the presence of any defects it is necessary to replace a spiral wire.
|
|
Check electric sockets and a yellow protective pipe on absence of damages and oxidation of contacts of the socket. |
|
|
|
|