Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
2.1. Specifications
2.2. Choice of engine oil
2.3. Check of level of engine oil of 2,0 l of DOHC
2.4. Check of level of engine oil of V6 2,5 l
2.5. Replacement of engine oil of 2,0 l of DOHC
2.6. Replacement of engine oil of V6 2,5 l
2.7. Replacement of the oil filter of 2,0 l of DOHC
2.8. Forward cover and oil pump of 2,0 l of DOHC
2.9. Oil pump and oil pallet of V6 2,5 l
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










2-1-tekhnicheskie-dannye.html

2.1. Specifications

Name

Nominal rates
Pressure of oil idling at oil 75-90°C, psi temperature
more than 11,4
Axial gap of a leading gear wheel of the oil pump, mm
0,16–0,205
Axial gap of a conducted gear wheel of the oil pump, mm
0,18–0,205
Lateral gap of a leading gear wheel of the oil pump, mm
0,08–0,14
Lateral gap of a conducted gear wheel of the oil pump, mm
0,06–0,12
Length of a spring without loading, mm
46,6
Length of a spring under load of 61 N, mm
40,1

System of greasing of the engine V of 6 2,5 l

Name

Nominal rates
Pressure of oil idling at oil 75-90°C, psi temperature
not less than 11,4
Axial gap of a gear wheel of the oil pump, mm
0,100–0,181
Lateral gap of a gear wheel of the oil pump, mm
0,100–0,181
Lateral gap of a conducted gear wheel of the oil pump, mm
0,06–0,12
Length of a spring without loading, mm
43,8
Length of a spring under load of 61 N, mm
40,1

«on a step back
2. Greasing system
on the following page»
2.2. Choice of engine oil