Tubes and hoses of system of cooling of the engine. KIA Magentis/Optima (since 2000 of release)
Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
3.1. Specifications
3.2. Cooling liquid
3.3. Check of tightness of system of cooling
3.4. Check of a cover of a radiator under pressure
3.5. Check of density of cooling liquid
3.6. Radiator
3.7. Radiator fan
3.8. Water pump of the DOHC engine
3.9. Water pump of the V6 engine
3.10. SOHC engine thermostat
3.11. V6 engine thermostat
3.12. Tubes and hoses of system of cooling of the engine
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










3-12-trubki-i-shlangi-sistemy-okhlazhdeniya-dvigatelya.html

3.12. Tubes and hoses of system of cooling of the engine

Tubes and hoses of system of cooling of the DOHC engine

Check

 PERFORMANCE ORDER

Check tubes and hoses of system of cooling on absence of damages, cracks and swellings. If necessary replace them.

Installation

 PERFORMANCE ORDER

At hose connection to the union of an exit of cooling liquid previously grease a sealing ring and the union with cooling liquid.

  1. Do not use oil or lubricant for greasing of a sealing ring and the union.
  2. Before installation of hoses clear unions of dirt, a dust and sand.
  3. Insert a pipe of cooling liquid against the stop.
  4. At installation use only a new sealing ring.

Tubes and hoses of system of cooling of the engine V 6

Check

 PERFORMANCE ORDER

Check tubes and hoses of system of cooling on absence of damages, cracks and swellings. If necessary replace them.

Installation

 PERFORMANCE ORDER

At hose connection to the union of an exit of cooling liquid previously grease a sealing ring and the union with cooling liquid.

  1. Do not use oil or lubricant for greasing of a sealing ring and the union.
  2. Before installation of hoses clear unions of dirt, a dust and sand.
  3. Insert a pipe of cooling liquid against the stop.
  4. At installation use only a new sealing ring.

«on a step back
3.11. V6 engine thermostat
on the following page»
4. Control and decrease in toxicity