Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
3.1. Specifications
3.2. Cooling liquid
3.3. Check of tightness of system of cooling
3.4. Check of a cover of a radiator under pressure
3.5. Check of density of cooling liquid
3.6. Radiator
3.7. Radiator fan
3.8. Water pump of the DOHC engine
3.9. Water pump of the V6 engine
3.10. SOHC engine thermostat
3.11. V6 engine thermostat
3.12. Tubes and hoses of system of cooling of the engine
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits

cam chat


3.2. Cooling liquid

    Do not uncover a radiator on the hot engine as leaving pairs can lead to strong burns. Close a radiator cover thick rags and slowly unscrew a cover before emergence of hissing of leaving steam. After the steam-out termination slowly turn on, and uncover a radiator.

Check of level of cooling liquid


1. Check of level of cooling liquid carry out on the cold engine. Uncover and by labels on щупе covers determine level of cooling liquid which should be between labels of F and L.
2. If necessary, add cooling liquid.

Quality of cooling liquid


1. Check lack of outgrowths of a rust or a scum round a cover or a radiator mouth.
2. Check purity of cooling liquid and absence in it polluting substances. If necessary, replace cooling liquid.

«on a step back
3.1. Specifications
on the following page»
3.3. Check of tightness of system of cooling