Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
3.1. Specifications
3.2. Cooling liquid
3.3. Check of tightness of system of cooling
3.4. Check of a cover of a radiator under pressure
3.5. Check of density of cooling liquid
3.6. Radiator
3.7. Radiator fan
3.8. Water pump of the DOHC engine
3.9. Water pump of the V6 engine
3.10. SOHC engine thermostat
3.11. V6 engine thermostat
3.12. Tubes and hoses of system of cooling of the engine
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










3-6-radiator.html

3.6. Radiator

Removal

 PERFORMANCE ORDER

1. Disconnect a wire from the negative plug of the storage battery.
2. Disconnect the socket from the engine of the fan of a radiator.
3. Turn out a stopper plum on a radiator and merge cooling liquid in the suitable container.
4. Weaken collars and disconnect the top and bottom hoses from a radiator.

5. On cars with an automatic transmission disconnect hoses from an oil radiator.

For an exception of an effluence of transmission liquid and dirt hit in system, close the ends of hoses of an oil radiator suitable caps.

6. Turn out bolts of fastening of a radiator.
7. Remove a radiator together with the radiator fan.

8. Remove the fan engine from a radiator.

Check

 PERFORMANCE ORDER

1. Check on a radiator on lack of extraneous subjects between plates.
2. Check on lack of pognuty plates of a radiator. If necessary straighten platinum.
3. Check a radiator on lack of cracks, damages and absence of leaks.
4. Check radiator hoses on lack of cracks, damages and attritions.
5. Check a broad tank on absence of damages.
6. Check hoses of an oil radiator of an automatic transmission on lack of cracks, damages and attritions.

Installation

 PERFORMANCE ORDER

1. Fill in in cooling system necessary amount of demanded cooling liquid.
2. Start up the engine and leave it to work until the thermostat valve will open, then stop the engine.
3. Uncover a radiator and add cooling liquid to the upper edge of a mouth of a radiator.
4. Check absence of leaks from cooling system.


«on a step back
3.5. Check of density of cooling liquid
on the following page»
3.7. Radiator fan