Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
4.1. System of ventilation of a case (PCV)
4.2. Check of the valve of ventilation of a case of PCV
4.3. Catching system паров fuels
4.4. The canister with absorbent carbon
4.5. The electromagnetic valve of cleaning of the canister with absorbent carbon
4.6. Cover of a toplivonalivny mouth
4.7. System of production of the fulfilled gases of cars with catalytic converter
4.8. Search and elimination of malfunctions
4.9. System of injection of MFI fuel
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 

4-2-proverka-klapana-ventilyacii-kartera-pcv.html

4.2. Check of the valve of ventilation of a case of PCV

 PERFORMANCE ORDER

1. Disconnect a ventilation hose from the valve of ventilation of a case (PCV). Remove the PCV valve from a cover and connect a ventilation hose.

2. Start up the engine in an idling mode, put a finger to a free end face of the PCV valve and be convinced that the depression which is present at an inlet collector is felt.

Plunzher in the PCV valve should move back and forth.

3. If depression is not felt, clear the PCV valve and a ventilation hose in solvent or replace them.

Check

 PERFORMANCE ORDER

1. Remove the valve of ventilation of a case.

2. To insert a thin core into the valve of ventilation of a case from a carving and check, whether the plunzher moves.

3. If the plunzher does not move, means, the valve of ventilation of a case is polluted. Clear or replace the valve.

Installation

 PERFORMANCE ORDER

Establish the valve of ventilation of a case and tighten it the moment given in the specification.

Inhaling moment: 8–12 N • m
«on a step back
4.1. System of ventilation of a case (PCV)		 on the following page»
4.3. Catching system паров fuels