Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
5.1. Specifications
5.2. Multipoint system of injection of fuel (MFI)
5.3. Checks of system of injection of MFI
5.4. Control lamp of malfunctions (MIL)
5.5. Diagnostic codes of malfunctions
5.6. The sensor of temperature of cooling liquid (ECT)
5.7. The sensor of absolute pressure in an inlet collector (MAF) with the IAT sensor
5.8. Measuring instrument of a consumption of air (MAF)
5.9. The sensor of temperature of air (IAT) arriving in the engine
5.10. Sensor of provision of a butterfly valve (TP)
5.11. Modulator of management of frequency of rotation of a cranked shaft of the engine idling
5.12. The warmed sensor of oxygen (HO2S)
5.13. Sensor of provision of a camshaft (CMP)
5.14. Sensor of an angle of rotation of a cranked shaft (CKP)
5.15. Fuel nozzles
5.16. Electromagnetic valve of system of catching паров fuels
5.17. Detonation sensor
5.18. An adjustment potentiometer WITH idling (only for etilirovanny gasoline)
5.19. Power steering (PSP) sensor [2,0 l of DOHC]
5.20. Sensor of provision of a butterfly valve (TP)
5.21. Fuel level sensor replacement (2,0 l of DOHC)
5.22. Check of the fuel pump (2,0 l of DOHC)
5.23. Check of the channel of cleaning of the canister with absorbent carbon (2,0 l of DOHC)
5.24. Check of the pressure created by the pump (2,0 l of DOHC)
5.25. Replacement of the fuel filter (2,0 l of DOHC)
5.26. Cleaning of throttle knot
5.27. Check of the channel of cleaning of the canister with absorbent carbon (2,5 l of V6)
5.28. Fuel level sensor replacement (2,5 l of V6)
5.29. Check of the fuel pump (2,5 l of V6)
5.30. Check of the pressure created by the pump (2,5 l of V6)
5.31. Replacement of the fuel filter (2,5 l of V6)
5.32. Adjustment of the sensor of provision of a butterfly valve (TP) (2,5 l of V6)
5.33. Pedal and accelerator cable
5.34. Fuel highway
5.35. Fuel tubes and tubes of system of catching паров fuels
5.36. Fuel tank
5.37. Technique of search of malfunctions
5.38. Search and elimination of malfunctions
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










5-17-datchik-detonacii.html

5.17. Detonation sensor

The detonation sensor established on the block of cylinders reacts to high-frequency fluctuations of the block of cylinders and transforms them to the electric signals which size increases at increase in a detonation. On the basis of these signals the ESM block displaces the ignition moment towards delay therefore the detonation is eliminated.

Check

 PERFORMANCE ORDER

1. Disconnect the socket from the detonation sensor.

2. Measure resistance between socket plugs 1 and 2.

Resistance: more than 5 megohms at 20°C

3. If resistance differs from given in the specification, replace the sensor.

Inhaling moment: 16–28 N • m

4. Measure capacity between socket plugs 1 and 2.

Capacity: 800–1600 пф

«on a step back
5.16. Electromagnetic valve of system of catching паров fuels
on the following page»
5.18. An adjustment potentiometer WITH idling (only for etilirovanny gasoline)