Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
5.1. Specifications
5.2. Multipoint system of injection of fuel (MFI)
5.3. Checks of system of injection of MFI
5.4. Control lamp of malfunctions (MIL)
5.5. Diagnostic codes of malfunctions
5.6. The sensor of temperature of cooling liquid (ECT)
5.7. The sensor of absolute pressure in an inlet collector (MAF) with the IAT sensor
5.8. Measuring instrument of a consumption of air (MAF)
5.9. The sensor of temperature of air (IAT) arriving in the engine
5.10. Sensor of provision of a butterfly valve (TP)
5.11. Modulator of management of frequency of rotation of a cranked shaft of the engine idling
5.12. The warmed sensor of oxygen (HO2S)
5.13. Sensor of provision of a camshaft (CMP)
5.14. Sensor of an angle of rotation of a cranked shaft (CKP)
5.15. Fuel nozzles
5.16. Electromagnetic valve of system of catching паров fuels
5.17. Detonation sensor
5.18. An adjustment potentiometer WITH idling (only for etilirovanny gasoline)
5.19. Power steering (PSP) sensor [2,0 l of DOHC]
5.20. Sensor of provision of a butterfly valve (TP)
5.21. Fuel level sensor replacement (2,0 l of DOHC)
5.22. Check of the fuel pump (2,0 l of DOHC)
5.23. Check of the channel of cleaning of the canister with absorbent carbon (2,0 l of DOHC)
5.24. Check of the pressure created by the pump (2,0 l of DOHC)
5.25. Replacement of the fuel filter (2,0 l of DOHC)
5.26. Cleaning of throttle knot
5.27. Check of the channel of cleaning of the canister with absorbent carbon (2,5 l of V6)
5.28. Fuel level sensor replacement (2,5 l of V6)
5.29. Check of the fuel pump (2,5 l of V6)
5.30. Check of the pressure created by the pump (2,5 l of V6)
5.31. Replacement of the fuel filter (2,5 l of V6)
5.32. Adjustment of the sensor of provision of a butterfly valve (TP) (2,5 l of V6)
5.33. Pedal and accelerator cable
5.34. Fuel highway
5.35. Fuel tubes and tubes of system of catching паров fuels
5.36. Fuel tank
5.37. Technique of search of malfunctions
5.38. Search and elimination of malfunctions
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










5-20-datchik-polozheniya-drosselnojj-zaslonki-tp.html

5.20. Sensor of provision of a butterfly valve (TP)

The sensor of provision of a butterfly valve hands over information on the basis of which the ESM block defines when the butterfly valve is closed, completely open or is in intermediate provisions. The sensor is rigidly connected to butterfly valve shaft. Depending on the provision of a butterfly valve resistance of the sensor changes.

Adjustment (2,0 l of DOHC)

 PERFORMANCE ORDER

1. Connect the scanner to the diagnostic socket.

2. In the absence of the scanner connect the digital voltmeter between socket plugs 1 and 3.

3. Include ignition, without starting the engine, and measure target tension of the sensor.

Target tension: 300–900 мВ

4. If tension differs from given in the specification, weaken screws of fastening of the sensor and adjust tension, turning the sensor.

Sensor turn clockwise increases target tension. After adjustment reliably tighten screws.

5. Switch off ignition.


«on a step back
5.19. Power steering (PSP) sensor [2,0 l of DOHC]
on the following page»
5.21. Fuel level sensor replacement (2,0 l of DOHC)