| Magentis and Optima repair since 2000 of release | | 1. Engines | | 2. Greasing system | | 3. Cooling system | | 4. Control and decrease in toxicity | | 5. Fuel system | | 5.1. Specifications | | 5.2. Multipoint system of injection of fuel (MFI) | | 5.3. Checks of system of injection of MFI | | 5.4. Control lamp of malfunctions (MIL) | | 5.5. Diagnostic codes of malfunctions | | 5.6. The sensor of temperature of cooling liquid (ECT) | | 5.7. The sensor of absolute pressure in an inlet collector (MAF) with the IAT sensor | | 5.8. Measuring instrument of a consumption of air (MAF) | | 5.9. The sensor of temperature of air (IAT) arriving in the engine | | 5.10. Sensor of provision of a butterfly valve (TP) | | 5.11. Modulator of management of frequency of rotation of a cranked shaft of the engine idling | | 5.12. The warmed sensor of oxygen (HO2S) | | 5.13. Sensor of provision of a camshaft (CMP) | | 5.14. Sensor of an angle of rotation of a cranked shaft (CKP) | | 5.15. Fuel nozzles | | 5.16. Electromagnetic valve of system of catching паров fuels | | 5.17. Detonation sensor | | 5.18. An adjustment potentiometer WITH idling (only for etilirovanny gasoline) | | 5.19. Power steering (PSP) sensor [2,0 l of DOHC] | | 5.20. Sensor of provision of a butterfly valve (TP) | | 5.21. Fuel level sensor replacement (2,0 l of DOHC) | | 5.22. Check of the fuel pump (2,0 l of DOHC) | | 5.23. Check of the channel of cleaning of the canister with absorbent carbon (2,0 l of DOHC) | | 5.24. Check of the pressure created by the pump (2,0 l of DOHC) | | 5.25. Replacement of the fuel filter (2,0 l of DOHC) | | 5.26. Cleaning of throttle knot | | 5.27. Check of the channel of cleaning of the canister with absorbent carbon (2,5 l of V6) | | 5.28. Fuel level sensor replacement (2,5 l of V6) | | 5.29. Check of the fuel pump (2,5 l of V6) | | 5.30. Check of the pressure created by the pump (2,5 l of V6) | | 5.31. Replacement of the fuel filter (2,5 l of V6) | | 5.32. Adjustment of the sensor of provision of a butterfly valve (TP) (2,5 l of V6) | | 5.33. Pedal and accelerator cable | | 5.34. Fuel highway | | 5.35. Fuel tubes and tubes of system of catching паров fuels | | 5.36. Fuel tank | | 5.37. Technique of search of malfunctions | | | 5.38. Search and elimination of malfunctions | | 6. Ignition system | | 7. Coupling | | 8. Transmission | | 9. Power shafts, axes | | 10. Suspension bracket | | 11. Steering | | 12. Brake system | | 13. Body | | 14. Central air | | 15. Electric equipment | | | 16. Electric circuits | |
| |
|
|
|
|
5-33-pedal-i-tros-akseleratora.html
5.33. Pedal and accelerator cable
Removal
|
|
1. Remove a tip of an internal part of a cable from the lever of a pedal of an accelerator. |
|
2. Turn out bolts of fastening of a cable of an accelerator to a partition of a motor compartment. |
|
3. Pull on itself the left side of a pedal of an accelerator and remove a pedal of management of an accelerator from the lever. |
|
4. Turn out bolts and remove an arm of a pedal of an accelerator. |
|
|
Check
|
1. Check a cable of an accelerator and a cable cover on absence of damages. 2. Check smoothness of moving of a cable of an accelerator in a cover. 3. Check an accelerator pedal on lack of a bend. 4. Check a condition of a returnable spring. 5. Check a condition of a tip of a cable of an accelerator. 6. Check functioning of a cable of an accelerator.
|
|
Installation
|
|
1. Grease with konsistentny greasing of a point of turn of a pedal of an accelerator. |
|
2. For hit prevention паров and the fulfilled gases in salon of the car put hermetic on a carving of bolts of fastening of an arm of a pedal of an accelerator.
Inhaling moment: 8–12 N • m
|
|
3. Insert a tip of a cable of an accelerator into capture on the end of the lever of a pedal of an accelerator. |
|
4. Put universal konsistentny greasing round a tip of a cable of an accelerator. |
|
|
|
|
|