Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
5.1. Specifications
5.2. Multipoint system of injection of fuel (MFI)
5.3. Checks of system of injection of MFI
5.4. Control lamp of malfunctions (MIL)
5.5. Diagnostic codes of malfunctions
5.6. The sensor of temperature of cooling liquid (ECT)
5.7. The sensor of absolute pressure in an inlet collector (MAF) with the IAT sensor
5.8. Measuring instrument of a consumption of air (MAF)
5.9. The sensor of temperature of air (IAT) arriving in the engine
5.10. Sensor of provision of a butterfly valve (TP)
5.11. Modulator of management of frequency of rotation of a cranked shaft of the engine idling
5.12. The warmed sensor of oxygen (HO2S)
5.13. Sensor of provision of a camshaft (CMP)
5.14. Sensor of an angle of rotation of a cranked shaft (CKP)
5.15. Fuel nozzles
5.16. Electromagnetic valve of system of catching паров fuels
5.17. Detonation sensor
5.18. An adjustment potentiometer WITH idling (only for etilirovanny gasoline)
5.19. Power steering (PSP) sensor [2,0 l of DOHC]
5.20. Sensor of provision of a butterfly valve (TP)
5.21. Fuel level sensor replacement (2,0 l of DOHC)
5.22. Check of the fuel pump (2,0 l of DOHC)
5.23. Check of the channel of cleaning of the canister with absorbent carbon (2,0 l of DOHC)
5.24. Check of the pressure created by the pump (2,0 l of DOHC)
5.25. Replacement of the fuel filter (2,0 l of DOHC)
5.26. Cleaning of throttle knot
5.27. Check of the channel of cleaning of the canister with absorbent carbon (2,5 l of V6)
5.28. Fuel level sensor replacement (2,5 l of V6)
5.29. Check of the fuel pump (2,5 l of V6)
5.30. Check of the pressure created by the pump (2,5 l of V6)
5.31. Replacement of the fuel filter (2,5 l of V6)
5.32. Adjustment of the sensor of provision of a butterfly valve (TP) (2,5 l of V6)
5.33. Pedal and accelerator cable
5.34. Fuel highway
5.35. Fuel tubes and tubes of system of catching паров fuels
5.36. Fuel tank
5.37. Technique of search of malfunctions
5.38. Search and elimination of malfunctions
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










5-34-toplivnaya-magistral.html

5.34. Fuel highway

Removal

 PERFORMANCE ORDER

1. Before separation топливопроводов remove pressure in fuel system as, otherwise, the fuel being under pressure, will intensively follow from fuel system.

For an exception of a razbryzgivaniye of fuel close a place of separation of fuel system pure rags and, being careful, smoothly separate pipelines.

2. Remove the fuel highway together with fuel nozzles.

Installation

 PERFORMANCE ORDER

1. Establish on a nozzle new sealing rings.

2. Grease sealing rings of nozzles with fuel.

3. At installation of nozzles turn them round an axis in one and other parties.

4. Be convinced that nozzles are densely inserted into the fuel highway.

If the nozzle is established incorrectly, the sealing ring can be jammed. Remove a nozzle and repeatedly establish it.


«on a step back
5.33. Pedal and accelerator cable
on the following page»
5.35. Fuel tubes and tubes of system of catching паров fuels