5-35-toplivnye-trubki-i-trubki-sistemy-ulavlivaniya-parov-topliva.html
5.35. Fuel tubes and tubes of system of catching паров fuels
Removal
|
|
1. Lift the car and unscrew two cap nuts of fastening of hoses to the fuel filter.
|
|
Before separation топливопроводов remove pressure in fuel system as, otherwise, the fuel being under pressure, will intensively follow from fuel system.
For an exception of a razbryzgivaniye of fuel close a place of separation of fuel system pure rags and, being careful, smoothly separate pipelines. |
2. Turn out assembly bolts of fastening of the fuel filter, then remove the fuel filter from an arm. 3. Lift the receiver also a hose of return of fuel. 4. Lift the receiver also a hose of system of catching паров fuels.
|
|
Check
|
1. Check hoses and pipes on lack of cracks, an excess, deformation, aging and a contamination. 2. Check the canister on lack of contaminations. 3. Check the fuel filter on lack of a contamination or damages.
|
|
Installation
|
|
1. Establish a hose of system of catching паров fuels and a hose of return of fuel.
If the tube has a fillet, pull over it a hose to a fillet, as is shown in drawing.
If on a tube there is no fillet, pull over it a hose before its reliable fastening.
|
|
2. Establish the fuel filter and fix an arm of the fuel filter. |
3. Tighten two cap nuts of fastening of hoses to the fuel filter.
Inhaling moment: 30–40 N • m
4. Establish clips and be convinced that they do not adjoin to other knots.
|
|
|
|