Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
6.1. Specifications
6.2. General information
6.3. Coil of ignition of the engine of 2,5 l of V6
6.4. Coil of ignition of the engine of 2,0 l
6.5. Ignition lock
6.6. Spark plugs
6.7. High-voltage wires
6.8. Installation of high-voltage wires (V6 engine)
6.9. Check of spark plugs
6.10. Search and elimination of malfunctions of fuel system
7. Coupling
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










6-4-katushka-zazhiganiya-dvigatelya-2-0-l.html

6.4. Coil of ignition of the engine of 2,0 l

Connect negative contact (-) whether source tension 3 In to the plug 2 sockets of the switchboard of capacity and check there is a continuity between plugs 1 and 2 when the plug 3 positive contact (+) is connected and disconnected.


Plug 3 and positive contact (+)

Plug 1 and positive contact (+) 2
Are connected
Conductivity (resistance of 0,78 Ohm)
Are disconnected
Conductivity is absent

Otherwise replace the capacity switchboard.

Measurement of resistance of a secondary winding

Will measure resistance between plugs of a high voltage of the coil of ignition.

Resistance of a secondary winding: 20 ± 10 % of kiloohm


«on a step back
6.3. Coil of ignition of the engine of 2,5 l of V6
on the following page»
6.5. Ignition lock