Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
7.1. Specifications
7.2. Pumping of hydraulic system of a drive of coupling
7.3. Coupling pedal
7.4. Main cylinder, tube and coupling hose
7.5. Main cylinder of coupling
7.6. Working cylinder of coupling
7.7. Casing and coupling disks
7.8. Search and elimination of malfunctions
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 

7-2-prokachka-gidravlicheskojj-sistemy-privoda-scepleniya.html

7.2. Pumping of hydraulic system of a drive of coupling

 PERFORMANCE ORDER

During removal of air add only pure liquid recommended by the manufacturer. Do not mix brake liquids of various brands.

Brake liquid: SAE J1703 (DOT 3)

The liquid used in a hydraulic drive, dissolves paint and plastic therefore at liquid hit on a paint and varnish covering of the car wash out it a large amount of water.


1. Weaken the pumping union in the cylinder of switching off of coupling and attach to it a hose. Arrange other end of a hose in glass capacity of sufficient volume.

2. Slowly press a coupling pedal.
3. At the pressed pedal of coupling weaken the union of pumping and let the air out from hydraulic system. Tighten the union of pumping and release a coupling pedal.

4. Repeat operations until there will be a brake liquid without air vials.

The fast repeated pressing of a pedal of coupling in the field of B – C can lead to a pusher exit from the case of the cylinder of coupling during pumping. To press a pedal of coupling it is necessary only after its return to the top situation (And).

«on a step back
7.1. Specifications		 on the following page»
7.3. Coupling pedal