Coupling pedal. KIA Magentis/Optima (since 2000 of release)
Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
7.1. Specifications
7.2. Pumping of hydraulic system of a drive of coupling
7.3. Coupling pedal
7.4. Main cylinder, tube and coupling hose
7.5. Main cylinder of coupling
7.6. Working cylinder of coupling
7.7. Casing and coupling disks
7.8. Search and elimination of malfunctions
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 








Ëó÷øèé è êà÷åñòâåííûé ðåìîíò ìåðñåäåñ ñ ñêëàäîì çàï÷àñòåé ìåðñåäåñ â 5000 íàèìåíîâàíèé.

7-3-pedal-scepleniya.html

7.3. Coupling pedal

Removal

 PERFORMANCE ORDER

1. Remove шплинт, a washer and a pin with a head and an opening under шплинт.

2. Turn out a bolt of fastening of a pedal of coupling.

Check

 PERFORMANCE ORDER

1. Check the lever of a pedal and the plug on lack of wear.
2. Check a coupling pedal on lack of a bend and deformation.
3. Check a returnable spring on absence of damages and elasticity loss.
4. Check a pillow of a pedal of coupling on absence of damages and wear.

5. Remove the switch of blocking of the lock of ignition and check conductivity between socket plugs.

Installation

 PERFORMANCE ORDER

1. Before installation grease plugs of a pedal of coupling.

Lubricant: SAE J 310, NGLI No. 1

2. Screw an assembly bolt of a pedal of coupling.

3. Before installation grease the plug, a pin, a washer and a pin with a head and an opening under шплинт.

Lubricant: SAE J 310, NGLI No. 2

4. Establish a pusher on a coupling pedal.
5. Adjust length of a pusher.

«on a step back
7.2. Pumping of hydraulic system of a drive of coupling		 on the following page»
7.4. Main cylinder, tube and coupling hose