Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
7.1. Specifications
7.2. Pumping of hydraulic system of a drive of coupling
7.3. Coupling pedal
7.4. Main cylinder, tube and coupling hose
7.5. Main cylinder of coupling
7.6. Working cylinder of coupling
7.7. Casing and coupling disks
7.8. Search and elimination of malfunctions
8. Transmission
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










7-4-glavnyjj-cilindr-trubka-i-shlang-scepleniya.html

7.4. Main cylinder, tube and coupling hose

Removal

 PERFORMANCE ORDER

1. Turn out a drain stopper and merge liquid for coupling.
2. Remove шплинт, a washer and a pin with a head and an opening under шплинт.
3. Disconnect a tube from the main cylinder of coupling.

4. Turn out a bolt of fastening of the main cylinder of coupling.

5. Remove clips of a tube of coupling.

6. Fix a nut on a hose of coupling and unscrew a nut on a coupling tube.

7. Remove a clip and disconnect from an arm.

8. Remove a coupling hose.

9. Disconnect a coupling hose from the working cylinder of coupling.

Check

 PERFORMANCE ORDER

Check a hose and a coupling pipe on lack of cracks and a contamination.

Assembly

 PERFORMANCE ORDER

1. Connect a coupling hose to the working cylinder of coupling.

2. Temporarily manually tighten a nut of fastening of a hose to a tube, then tighten it the inhaling moment recommended by the specification.

3. Establish a clip of fastening of a hose to an arm.

4. Establish the main cylinder of coupling.

5. Before installation grease the plug, a pin, a washer and a pin with a head and an opening under шплинт.

Lubricant: SAE J 310, NGLI No. 2

6. Establish a pusher on a coupling pedal.
7. Fill in liquid for coupling in the main cylinder of coupling.
8. Pump over a hydraulic drive of coupling.


«on a step back
7.3. Coupling pedal
on the following page»
7.5. Main cylinder of coupling