8.1.7. Transmission shaft

1. Remove an arm of the top support of a transmission.

2. Remove an arm of a cable of gear shifting.

3. Remove the cylinder of switching off of coupling.

4. Remove the switch of a lamp of a backing.

5. Remove the mechanism of a drive of a speedometer.

6. Remove a shaft of a fork of switching off of coupling and the basic plug.

7. Turn out a bolt of fastening of a dilator.

9. Remove a lateral cover and an intermediate gear wheel.

10. Remove the choice lever, the lever of gear shifting and a consolidation cover.

11. Remove a coupling case from a transmission case with a broad spring ring.

12. Remove the case of blocking and a management shaft.

13. Remove a gear shifting shaft.

14. Remove a fork of switching of the 5th transfer.

15. Remove a fork of switching of the 3rd and 4th transfer.

15. Remove a fork of switching of the 1st and 2nd transfer.

17. Remove the holder of the bearing.

18. At the same time remove entrance and conducted shaft assembled.

19. Remove differential.

20. Uncover a clamp and the roller bearing.

21. Using the special tool (09455-33200) remove the external rasporny plug of the bearing of differential and oil consolidation of a power shaft.

22. Remove levers of switching and a choice of transfers from a transmission case.

1. Using the special tool (09455-33200) establish oil consolidation of a power shaft.

Establish oil consolidation of a power shaft without distortions.

2. Establish levers of switching and a choice of transfers to a transmission case

3. Establish a cover of a clamp and the needle bearing.

4. Establish differential.

5. At the same time establish entrance and conducted shaft assembled.

6. Establish the bearing of the holder.

7. Establish a fork of switching of the 1st and 2nd transfer.

8. Establish a fork of switching of the 3rd and 4th transfer.

9. Establish a fork of switching of the 5th transfer.

10. Establish a gear shifting shaft.

11. Establish the case of blocking and a management shaft.

12. Collect a case of coupling with a transmission case with a broad spring ring.

13. Establish the choice lever, the lever of gear shifting and a consolidation cover.

15. Establish knot of the ball tarelchaty valve.

16. Screw a bolt of fastening of a dilator.

17. Establish a shaft of a fork of switching off of coupling and the basic plug.

18. Establish the mechanism of a drive of a speedometer.

19. Establish the switch of a lamp of a backing.

20. Establish the cylinder of switching off of coupling.