Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
8.1. Mechanical transmission
8.2. Automatic transmission
8.2.1. Specifications
8.2.2. Check of level of liquid in an automatic transmission
8.2.3. Liquid replacement in an automatic transmission
8.2.4. Replacement of the oil filter
8.2.5. Check of conductivity of the switch of ranges of a transmission
8.2.6. Check of conductivity of the switch of a sports mode (F4A42–2 2,0 and 2,5 l)
8.2.7. Switch of ranges of a transmission and adjustment of a cable of management
8.2.8. Check of components of an automatic transmission
8.2.9. Testing of collaboration of an automatic transmission and the engine on the motionless car (stall test)
8.2.10. Diagnostic codes
8.2.11. Diagnostics function
8.2.12. Inspection card of codes of diagnostics
8.2.13. The inspection card for determination of malfunctions
8.2.14. Adjustment of an axial gap of a reactionary brake
8.2.15. Adjustment of an axial gap of a brake of the second transfer
8.2.16. Adjustment of an axial gap of a brake of low transfer and backing transfer
8.2.17. Adjustment of an axial gap of a solar gear wheel of lowering transfer
8.2.18. Adjustment of preliminary loading of differential
8.2.19. Elements of a control system of a transmission
8.2.20. Removal and transmission installation
8.2.21. Transmission repair
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 








canada pharmacies

8-2-11-funkciya-diagnostiki.html

8.2.11. Diagnostics function

 PERFORMANCE ORDER

1. Connect the HI scanner - SCAN to the diagnostic socket.
2. Consider codes of malfunctions.

In memory (RAM) 8 codes of malfunctions in sequence of their emergence can be written down.

The same diagnostic code of malfunction cannot be written down so many time, how many malfunction there is in one and too time.

If there are malfunctions after in memory 8 codes of malfunctions are written down, codes of malfunctions, since codes which were written down first of all will be erased.

Do not disconnect the storage battery, yet считаны all written-down codes of malfunctions as they will be erased at a battery detachment.

3. If the system is activated and the transmission is blocked on the third transfer, in RAM the diagnostic code of malfunction will be written down. In this case three diagnostic codes of malfunction can be written down in memory.
4. Cancellation will occur if, to a transmission blocked on the third transfer, the ignition key will turn in the situation OFF, and the diagnostic code of malfunction is written down in RAM.
5. Storing of codes of diagnostics.

  • To 8 elements of the diagnosis and 3 points it can be remembered.
  • If the capacity of the store is exceeded the diagnosis and points will be rewritten since codes which were written down first of all.

6. Removal of codes of diagnostics.

  1. Automatic removal

All codes of diagnostics are removed from memory through 200 times after ATF temperature досягает 50°C after storing of the freshest code of diagnostics.

  1. Compulsory removal.

Remembered codes of diagnostics can be removed, using the HI scanner - SCAN if the following conditions are satisfied:

  • ignition is included;
  • there are no impulses from the sensor of an angle of rotation of a cranked shaft;
  • there are no impulses from the sensor of frequency of rotation of a conducted shaft;
  • there are no impulses from the sensor of speed of the car;
  • function of malfunctions does not work.

«on a step back
8.2.10. Diagnostic codes
on the following page»
8.2.12. Inspection card of codes of diagnostics