Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
8.1. Mechanical transmission
8.2. Automatic transmission
8.2.1. Specifications
8.2.2. Check of level of liquid in an automatic transmission
8.2.3. Liquid replacement in an automatic transmission
8.2.4. Replacement of the oil filter
8.2.5. Check of conductivity of the switch of ranges of a transmission
8.2.6. Check of conductivity of the switch of a sports mode (F4A42–2 2,0 and 2,5 l)
8.2.7. Switch of ranges of a transmission and adjustment of a cable of management
8.2.8. Check of components of an automatic transmission
8.2.9. Testing of collaboration of an automatic transmission and the engine on the motionless car (stall test)
8.2.10. Diagnostic codes
8.2.11. Diagnostics function
8.2.12. Inspection card of codes of diagnostics
8.2.13. The inspection card for determination of malfunctions
8.2.14. Adjustment of an axial gap of a reactionary brake
8.2.15. Adjustment of an axial gap of a brake of the second transfer
8.2.16. Adjustment of an axial gap of a brake of low transfer and backing transfer
8.2.17. Adjustment of an axial gap of a solar gear wheel of lowering transfer
8.2.18. Adjustment of preliminary loading of differential
8.2.19. Elements of a control system of a transmission
8.2.20. Removal and transmission installation
8.2.21. Transmission repair
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










8-2-2-proverka-urovnya-zhidkosti-v-avtomaticheskojj-korobke-peredach.html

8.2.2. Check of level of liquid in an automatic transmission

 PERFORMANCE ORDER

The car should stand on an equal horizontal surface.

1. Make a trip before transmission warming up to temperature 70–80°C.
2. Park the car on an equal horizontal surface.
3. At the working engine move the selector lever from situation N to all provisions and back in situation N.

4. Before extraction щупа wipe from dirt area near щупа. Get щуп and check a condition of transmission liquid. Check color of liquid in an automatic transmission. Check liquid in an automatic transmission on presence of unusual smells. For definition of change of color and a smell of liquid compare it to fresh liquid.

If liquid in an automatic transmission has a burned smell or is polluted by parts of a material of plugs or from a friction, probably, major maintenance of a transmission is required.

5. Check level of liquid which should be between HOT labels. If necessary, add necessary amount of demanded liquid.

Transmission liquid: GENUINE DIAMOND ATF SP IIM

Low level of liquid can be at the bottom of many malfunctions as air gets to liquid, and the liquid suspension with air becomes compressed that leads to chaotic change of pressure and violation of work of couplings and tape brakes.

Also raised level of liquid leads to that rotating gear wheels of a transmission shake up foam which leads to the same results, as the air which has got to transmission liquid.

In any case vials of air lead to an overheat and oxidation of transmission liquid which, getting in the valve, breaks work of coupling and brakes. Foaming can lead to an effluence of liquid which can be accepted for leakage of liquid.

6. Reliably insert щуп for level measurement.
7. Transmission liquid and oil filters should be replaced always at carrying out major maintenance of a transmission.


«on a step back
8.2.1. Specifications
on the following page»
8.2.3. Liquid replacement in an automatic transmission