Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
8.1. Mechanical transmission
8.2. Automatic transmission
8.2.1. Specifications
8.2.2. Check of level of liquid in an automatic transmission
8.2.3. Liquid replacement in an automatic transmission
8.2.4. Replacement of the oil filter
8.2.5. Check of conductivity of the switch of ranges of a transmission
8.2.6. Check of conductivity of the switch of a sports mode (F4A42–2 2,0 and 2,5 l)
8.2.7. Switch of ranges of a transmission and adjustment of a cable of management
8.2.8. Check of components of an automatic transmission
8.2.9. Testing of collaboration of an automatic transmission and the engine on the motionless car (stall test)
8.2.10. Diagnostic codes
8.2.11. Diagnostics function
8.2.12. Inspection card of codes of diagnostics
8.2.13. The inspection card for determination of malfunctions
8.2.14. Adjustment of an axial gap of a reactionary brake
8.2.15. Adjustment of an axial gap of a brake of the second transfer
8.2.16. Adjustment of an axial gap of a brake of low transfer and backing transfer
8.2.17. Adjustment of an axial gap of a solar gear wheel of lowering transfer
8.2.18. Adjustment of preliminary loading of differential
8.2.19. Elements of a control system of a transmission
8.2.20. Removal and transmission installation
8.2.21. Transmission repair
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










8-2-7-pereklyuchatel-diapazonov-korobki-peredach-i-regulirovka-trosa-upravleniya.html

8.2.7. Switch of ranges of a transmission and adjustment of a cable of management

 PERFORMANCE ORDER

1. Establish the selector lever in the situation "N".
2. From a transmission weaken a nut of fastening of a cable of management to the lever, for cable and control lever release.

3. Establish the selector lever in neutral situation.

4. Weaken assembly bolts of fastening of the case of the switch of ranges of a transmission, then turn the case of the switch of ranges of a transmission so that were combined an opening on the end of a control lever and an opening in a ledge of the case of the switch of ranges of a transmission.

5. Tighten assembly bolts of fastening of the case of the switch of ranges of a transmission the moment of the inhaling given in the specification. Be careful, that at a tightening of bolts not to displace the switch case.

6. Softly press a cable of management of a transmission in the direction of an arrow and then tighten an adjusting nut.

7. Check that the lever of the selector is in situation N.
8. Check work and switch functioning for each position of the lever of the selector.


«on a step back
8.2.6. Check of conductivity of the switch of a sports mode (F4A42–2 2,0 and 2,5 l)
on the following page»
8.2.8. Check of components of an automatic transmission