Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
8.1. Mechanical transmission
8.2. Automatic transmission
8.2.1. Specifications
8.2.2. Check of level of liquid in an automatic transmission
8.2.3. Liquid replacement in an automatic transmission
8.2.4. Replacement of the oil filter
8.2.5. Check of conductivity of the switch of ranges of a transmission
8.2.6. Check of conductivity of the switch of a sports mode (F4A42–2 2,0 and 2,5 l)
8.2.7. Switch of ranges of a transmission and adjustment of a cable of management
8.2.8. Check of components of an automatic transmission
8.2.9. Testing of collaboration of an automatic transmission and the engine on the motionless car (stall test)
8.2.10. Diagnostic codes
8.2.11. Diagnostics function
8.2.12. Inspection card of codes of diagnostics
8.2.13. The inspection card for determination of malfunctions
8.2.14. Adjustment of an axial gap of a reactionary brake
8.2.15. Adjustment of an axial gap of a brake of the second transfer
8.2.16. Adjustment of an axial gap of a brake of low transfer and backing transfer
8.2.17. Adjustment of an axial gap of a solar gear wheel of lowering transfer
8.2.18. Adjustment of preliminary loading of differential
8.2.19. Elements of a control system of a transmission
8.2.20. Removal and transmission installation
8.2.21. Transmission repair
9. Power shafts, axes
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 








canada drug

8-2-9-testirovanie-sovmestnojj-raboty-avtomaticheskojj-korobki-peredach-i-dvigatelya.html

8.2.9. Testing of collaboration of an automatic transmission and the engine on the motionless car (stall test)

Testing is carried out to define the maximum frequency of rotation of the engine when the lever of the selector is established in provisions D or R, and also to check operation of the hydrotransformer, a starter and the unilateral coupling, and also the characteristic of couplings and brakes.

At testing performance nobody should stand ahead of and behind the car.

  1. Before testing check levels of all operational liquids and, if necessary, finish them to the normal.
  • The temperature of transmission liquid should be in limits 80-100°C.
  • Temperature of cooling liquid 80-100°C.
  1. Establish a maple emphasis under back wheels.
  2. Tighten the parking brake and press a brake pedal.
  3. Start the engine.
  4. Move the selector lever to a position D. The left foot press against the stop a brake pedal, and the right foot smoothly press an accelerator pedal. When frequency of rotation of a cranked shaft of the engine does not increase any more, read indications of a tachometer and release an accelerator pedal.

For an exception of damage of a transmission testing carry out during 8 pages.

If it is necessary to carry out more than one testing at the working engine move the selector lever to a position N and about put the engine to work at frequency of rotation of idling before cooling of transmission liquid. Operation of the engine on frequency of rotation of idling cools transmission liquid and prevents deterioration of its properties.

Frequency of rotation of a cranked shaft of the engine when testing collaboration of an automatic transmission and the engine on the motionless car (stall test): 2000–2900 mines-1

(6) Similarly hold testing in position R of the lever of the selector.

Frequency of rotation of a cranked shaft of the engine when testing collaboration of an automatic transmission and the engine on the motionless car (stall test): 2000–2900 mines-1

a. Frequency of rotation of a cranked shaft of the engine is higher than the specification in a position D and R.

  • Low pressure in the pipeline.
  • Proskalzyvaniye of brake tapes on low transfer and backing transfer.

b. Frequency of rotation of a cranked shaft of the engine is higher than the specification only in a position D.

  • Proskalzyvaniye of coupling of lowering transfer.

c. If frequency of rotation of a cranked shaft of the engine is higher than the specification only in a position R.

  • Proskalzyvaniye of backing coupling.

d. If frequency of rotation of a cranked shaft of the engine is lower than the specification in a position D and R.

  • Hydrotransformer damage.
  • Insufficient engine capacity

«on a step back
8.2.8. Check of components of an automatic transmission
on the following page»
8.2.10. Diagnostic codes