Power shaft with Birfield (B) CV JOINTS. KIA Magentis/Optima (since 2000 of release)
Magentis and Optima repair since 2000 of release
1. Engines
2. Greasing system
3. Cooling system
4. Control and decrease in toxicity
5. Fuel system
6. Ignition system
7. Coupling
8. Transmission
9. Power shafts, axes
9.1. Specifications
9.2. Power shaft
9.3. A power shaft with CV JOINTS of ball type and type Birfield
9.4. A power shaft with Birfield (B) CV JOINTS
9.5. Central bearing and internal power shaft
9.6. Rotary fist and nave of a forward wheel
9.7. Back axis
9.8. Search and elimination of malfunctions
10. Suspension bracket
11. Steering
12. Brake system
13. Body
14. Central air
15. Electric equipment
16. Electric circuits
 










9-4-privodnojj-val-so-shrusami-birfield-b.html

9.4. A power shaft with Birfield (B) CV JOINTS

Dismantling

 PERFORMANCE ORDER

  1. Do not assort knot of a support of rollers.
  2. For greasing of CV JOINTS use only special greasing.
  3. At assembly of the CV JOINT it is necessary to establish new collars.

1. Remove collars and pull together a protective cover from the ball CV JOINT (T. J.) power shaft.

Be careful not to damage a protective cover.

2. Special пассатижами remove a lock ring and a hammer through a brass core bring down a support of rollers of tripoidny connection from a power shaft.

3. Clear a support of rollers of tripoidny connection.

4. Remove collars and pull together protective covers of the ball CV JOINT (B. J.) and Birfield CV JOINT (B. J.).

If the protective cover is repeatedly used before cover removal for its protection, wrap up shlitsa of a power shaft a sticky tape.

Check

 PERFORMANCE ORDER

1. Check a condition шлицов a power shaft.
2. Check on lack of traces of a rust, water and extraneous subjects in a protective cover of the Birfield CV JOINT (B. J.).
3. Check a support of rollers of tripoidny connection on lack of wear or corrosion.
4. Check deepening in the CV JOINT (T. J.) on lack of wear or corrosion.

5. Check a dynamic damper on absence of damages.

Assembly

 PERFORMANCE ORDER

1. Before cover installation for its protection wrap up shlitsa of a power shaft from the tripoidny hinge (T. J.) sticky tape.

2. Put greasing on a power shaft and establish a cover.

Birfield CV JOINT greasing (B. J.):

  • Except 2,5 l of AKP: Centoplex 278M/136K
  • Only 2,5 l of AKP: CENTURY

Greasing of the tripoidny CV JOINT (T. J.):

  • Except 2,5 l of AKP: KLKTJ 41–182
  • Only 2,5 l of AKP: ONELUBERGKN

3. For installation of a dynamic damper arrange the Birfield CV JOINT (B. J.) on a straight line in relation to a shaft, establish a damper and fix it a small collar.

4. Enclose greasing in a protective cover of the tripoidny CV JOINT (T. J.) also establish a cover on the hinge.

Protective cover of the tripoidny hinge (T. J.):

  • 2,0 l of AKP:
  • Hinge: 75 ±3 g

Protective cover: 45 ±3 g

  • 2,5 l of AKP:
  • Hinge: 65 ±3 g

5. Enclose greasing in a protective cover of the tripoidny Birfield CV JOINT (B. J.) it is so much greasing, how many it was wiped during hinge check.

Protective Birfield hinge (Century of J.) :

  • 2,0 l of AKP:
  • Hinge: 55 ±3 g

Protective cover: 60 ±3 g

  • 2,5 l of AKP:
  • Hinge: 55 ±3 g

Protective cover: 55 ±3 g

6. Establish covers.
7. Fix a protective cover of the Birfield CV JOINT (B. J.) collars.

8. For adjustment of amount of air in the CV JOINT T. J. fix covers so that the length of a power shaft corresponded to demanded values

Length of the left power shaft:

  • With AKP of 2,0 l: 687,6±2 mm
  • With AKP of 2,5 l: 619,4±2 mm

Length of the right power shaft:

  • With AKP of 2,0 l: 1000,62±2 mm
  • With AKP of 2,5 l: 682,3±2 mm

9. Fix a protective cover of the CV JOINT T. J. collars.


«on a step back
9.3. A power shaft with CV JOINTS of ball type and type Birfield
on the following page»
9.5. Central bearing and internal power shaft